DOWNLOAD LG F8068QDP2 Service Manual ↓ Size: 8.4 MB | Pages: 52 in PDF or view online for FREE

Model
F8068QDP2
Pages
52
Size
8.4 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
f8068qdp2.pdf
Date

LG F8068QDP2 Service Manual ▷ View online

9
Connect Drain Hose.
6
Connect power plug.
7
If the drain hose is not installed properly, the unit will not drain properly.
This allows water to back flow into the unit which can cause odors.
Refer to Owner Manual for proper drain hose installation.
The odor could also be coming from the home’s drain to which the drain hose is attached.
In this type of drain hose installation, the odor could be coming from the standpipe.
This odor can come up the drain hose and into the unit.
Pour a cup or two of bleach or vinegar down the home drain 
and let it sit for 24 hours before running another cycle.
This will help eliminate odor from the home drain. 
If a cycle is started too soon after doing this, it will not help the issue.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, 
it may be the cause of a fire.
about 100 cm
about 145 cm
about 105 cm
Laundry tub
Max. 100cm
min. 60cm
Max. 100cm
min. 60cm
Retainer
Tie
strap
Hose
min. 60 cm
max. 100 cm
10
Check the horizontality with a level (Gage).
8
1 Step
If washing machine legs are loose or not screwed, then 
screw up
with the spanner wrench. 
Using the level, level the washing machine from front to back and side to side.
2 Step
Using the spanner wrench to adjust leg for 
horizontality
and try for 
Diagonal test
.
3 Step
Perform a Rinse and Spin with some clothing in the machine.
To do this, put 2~3kg of clothing in the unit, power on the unit, press the Rinse and Spin 
button, and then start. When the unit reaches the spin cycle, watch for vibrations.
If the unit is vibrating, make small adjustments to the leg until they subside. (Try 2Step again)
4 Step
Tighten
the lock nut against the base of the machine to 
lock
the 
position leg
.
Lower the foot until there is no gap between floor and foot.
And only use 
adjustment rubber
when difference at the leg adjustment is more than 
10mm
.
Place your right hand on the back, right corner and your left hand on the front,
left corner of the unit, then attempt to rock the unit from corner to corner.
Then, move your right hand to the front, right side and your left hand to the
back, left corner and attempt to rock the unit from corner to corner.
If the unit is level, it will not rock.  However, if the unit is not level, it will rock.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.
How to perform a diagonal test:
A level
Higher
Tighten
Adjustable feet
Diagonal test
Tighten
Adjustable feet
Higher
Tighten
Adjustable feet
Lower
Lock nut
10mm
Adjustable bolt
Tighen the lock nut
4620ER3001B
(Gray)
for Wooden floors
Rubber Cup
4620ER3001A
(Black)
for Tile floors
Test operation
9
11
1
Preparation
for washing.
· Connect the power plug to the
outlet.
· Connect the inlet hose.
2
Press the power button.
3
Press the START/PAUSE
button.
6
Check the water heating.
· Press “Temp.” button,
the present temperature will 
be displayed.
· Check if the drum rotates
clockwise and counterclockwise.
5
Check automatic reverse turn.
4
Check the water supply.
· Check if water is supplied through
the detergent dispenser.
7
Check drain and spin.
· Power off and then power on.
Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.
· Check drain and spin.
· Power off and then power on.
· Check if the door can be opened
after Door Lock lamp turns off.
8
Power off and open the door.
9
Water removal.
· If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
· In case of cotton program.
5. OPERATION
Wash program selector
• 13 programs can be set
depending on the type of
the laundry.
• If the power button is
pressed, all lamps are on
• By turning the dial, [Cotton -
Cotton Quick - Synthetic -
Duvet - Bulky - Quick 30 -
Rinse+Spin - Spin - Delicate -
Hand Wash/Wool - Bio Care -
Boiling Care - Baby Care]
can be selected.
This is a bi-directional selector.
Start/Pause button
• Use the button to start or pause wash
cycle.
• The power turns off automatically 4
minutes after the pause button is
pressed.
Child -Lock
• Child Lock system can
be set and canceled by
pressing and holding
both 
Medic Rinse
button
and 
Pre Wash
button
simultaneously more
than 3 seconds.
Tub Clean
• Tub Clean course can be set by
pressing and holding 
Intensive
and
Crease Care
button simultaneously.
• Tub Clean is special cycle to clean the
inside of the washer.
Option
• Medic Rinse : Function that offers more purity in rinse operation by 
maintaining the optimum temperature for elimination of 
remnant detergent. It can be selected in all courses with the 
exception of Quick 30. Hand Wash/Wool, Delicate course.
• Intensive : • If the laundry is heavily soiled “Intensive” option is effective.
• By selecting the Intensive option, the wash time may be 
extended, depending on the program selected.
• Pre Wash : If the laundry is heavily soiled, “Pre Wash” course is effective.
Pre Wash is available in Cotton and Synthetic Program.
• Crease Care : If you want to prevent crease, select this button with spin
5-1. F1*22TD(1~9)
12
Page of 52
Display

Click on the first or last page to see other F8068QDP2 service manuals if exist.