LG F63280WR Service Manual ▷ View online
21
Unbalanced Error (UE)
Does the load lean toward
one
side, or is the load a few items?
Is the washing machine
installed
at an
angle?
Adjust the height of washing
machine to be kept
machine to be kept
horizontally.
( Page 7)
Is the laundry
mixed?
The few items of clothing will clump together
and their weight will be in one place on the drum,
throwing the weight off during spin mode.
So add some laundry to overcome UE error.
And rearrange load to allow proper spinning.
and their weight will be in one place on the drum,
throwing the weight off during spin mode.
So add some laundry to overcome UE error.
And rearrange load to allow proper spinning.
Try
rearranging the laundry in drum
Or the laundry is
separated by size, type, and color.
Separate by size,
type and color
YES
YES
NO
NO
YES
22
Water Outlet Error (OE)
Is the drain hose kinked ?
Check drain hose for kink and
straighten the
Hose
.
Drain Hose
Is the
Pump filter
clogged ?
Next Page
Check & Clean
Pump Filter
.
YES
YES
NO
NO
This kind of accumulation on the drain filter not only
prevents proper drainage, but also will promote
bacteria growth and cause odors.
This drain filter should be cleaned once a month.
prevents proper drainage, but also will promote
bacteria growth and cause odors.
This drain filter should be cleaned once a month.
* How to disassemble and clean pump filter
Open the Cover by coin or
finger(only new model)
finger(only new model)
Cover
Drain water by removing the
hose cap.
hose cap.
Disassemble the pump
filter by turning the filter
cap counterclockwise.
filter by turning the filter
cap counterclockwise.
Filter clogged by foreign objects
Assemble & close cap
Pump Filter
filter Cap
Hose Cap
Clean the filter
Filter Cap
23
7-6. TROUBLESHOOTING WITH ERROR
Water Inlet Error (IE)
Is the water tap
closed?
[Note] Environmental safety check list
1. No water tap leakage & freeze.
2. No entanglement of water supply hose.
.
e
g
a
k
a
e
l
e
s
o
h
y
l
p
p
u
s
r
e
t
a
w
o
N
.
4
.
e
g
a
t
r
o
h
s
r
e
t
a
w
o
N
.
3
5. No the inlet filter clogged.
5. No the inlet filter clogged.
Check
the
Water tap
and open it
fully.
When there is water in the tub,
is the water level frequency
over 26.2KHz?
is the water level frequency
over 26.2KHz?
Reconnect or repair
the
Connector
.
Or replace
the
Harness
.
Replace
the
Inlet Valve
.
Is the
Connector
connected correctly to the
Main
PCB
and the
Inlet Valve
?
Or is the
Harness
alright ?
Check
the
Air Chamber
and
the Tube
(clogged)
And When you check the water level frequency again,
if it is over 26.2KHz, you
if it is over 26.2KHz, you
replace
the Pressure switch.
YES
YES
NO
NO
Replace
the
Main PCB
.
NO
YES
YES
NO
NO
Is the each resistance of Inlet Valve within
3.5 ~4.5 k
3.5 ~4.5 k
Ω ?
When the washing machine is started,
is operated the inlet valve?
is operated the inlet valve?
Pre. Valve
Main Valve
Dry Valve
1
3
2
1
3
2
24
Is the water coming in
drawer
drawer
continuously?
Replace the
Main PCB
.
After power off for 10 sec. and power on.
Does the water level over reference line
Does the water level over reference line
and Is
not
the water level frequency 26.2Khz ?
Or does
not
the water level over reference line
and is the water level frequency 26.2Khz ?
* Water level frequency
- Press and Hold
'Intensive'
&
'Option(Left)'
simultaneously.
Replace the
Inlet Valve
assembly.
YES
If FE is displayed again,
then replace the
then replace the
Pressure Switch
.
If FE is displayed again,
then replace the
then replace the
Main PCB
.
Check the
Air Chamber
and the
Tube
(clogged).
Click on the first or last page to see other F63280WR service manuals if exist.