DOWNLOAD LG F24953WHS Service Manual ↓ Size: 14.57 MB | Pages: 66 in PDF or view online for FREE

Does the load lean toward one

side, or is the load a few items?

Is the washing machine installed

at an angle?

Adjust the height of washing

machine to be kept horizontally. 

( Page 7)

Is the laundry mixed?

The few items of clothing will clump together 

and their weight will be in one area of the drum,

throwing the weight off during spin mode.

Try rearranging the laundry in drum 

Or the laundry is separated by size, type, and color.

Separate by size, 

type and color

Is the drain hose kinked ?

Check drain hose for kink and straighten the 

.

Drain Hose

Is the 

clogged ?

Check & Clean 

.

This kind of accumulation on the drain filter not only
prevents proper drainage, but also will promote
bacteria growth and cause odors.
This drain filter should be cleaned once a month.

Open the Cover 

Drain water by removing the

hose cap.

Disassemble the pump

filter by turning the filter

cap counterclockwise.

Filter clogged by foreign objects

Assemble & close cap

Clean the filter

Is the 

connected correctly to

the 

and the 

?

Or is the 

right?

Reconnect or repair the 

.

Or replace the 

.

Is the 

greater

than 1.0 m above the floor?

When there is no water in the

pump casing, is the water level

frequency over 25.5kHz ?

Observe 

requirements 

of 

m maximum.

- Your washer will not be able to drain out 

water adequately, if the standpipe exceeds 1.0 m.

In this case, water may flow back into the washer.

Check the 

and the 

(clogged).

Check the water level frequency again, if it is over

25.5kHz, replace the

Replace the 

.

Replace the 

.

Is the resistance of the Pump Motor out

of range 152~175Ω?
Or is the Impeller operating normally?

Does the Pump motor start, when the spin mode

starts?

Clean the drain hose.

If the drain hose blocked?

OR

Power off for 10sec. Then power on.

Is the water level over reference line and is the water level frequency under 21.3kHz?

* Water level frequency

- Touch and Hold '

Pre Wash

' & '

Temp.

' 

simultaneously.

If FE is displayed again, 

then replace the 

.

If FE is displayed again, 

then replace the 

.

Drain out the water and then

check the 

and the 

(clogged).

Is water continuously

coming into the drawer?

Replace the 

Replace the 

assembly.

Data view type: ‘040’