LG F14A8YD / F14A8YD6 Service Manual ▷ View online
4
To reduce the risk of personal injury, adhere to all industry recommended safety procedures including
the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this manual could result in property damage, personal
injury or death.
the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this manual could result in property damage, personal
injury or death.
WARNING
ITEM
F14A8RD(1~9)
POWER SUPPLY
PRODUCT WEIGHT
ELECTRICITY
CONSUMPTION
100 ~ 1000 kPa (1.0 kgf / cm
2
~ 10.0 kgf / cm )
2
Electronic
Refer to the Rating Label
600 mm (W) x 640 mm (D) x 850 mm (H)
Cotton, Cotton Eco, Mix, Easy Care, Duvet, Baby Care,
Skin Care, Sports Wear, Wool, Quick 30, Silent Wash, Rinse+Spin,
Dry Only, Wash+Dry
Normal, Rinse+, Rinse++, Rinse++Hold, Normal+Hold
PTC+Solenoid
by Pressure Sensor S/W
From 3 hours to 19 hours
Adapted
Adapted
Adapted
10 items
Adapted
Adapted
Adapted
Adapted
190 W
380 W
30 W
2120 W
220 - 240 V~, 50 Hz
72 kg
OPERATION WATER PRESSURE
CONTROL TYPE
DIMENSION
WASH PROGRAM
RINSE
DOOR SWITCH TYPE
WATER LEVEL
RESERVATION
SENSING LAUNDRY AMOUNT
FUZZY LOGIC
DISPLAY REMAINING TIME
ERROR DIAGNOSIS
POWER AUTO OFF
CHILD LOCK
AUTO RESTART
TIME SAVE
WASH CAPACITY
WASHING
SPIN
DRAIN MOTOR
WASH HEATER
REVOLUTION
SPEED
WASH
SPIN
DRY HEATER
1400 RPM : No Spin / 400 / 800 / 1000 / 1400
46 rpm
1550 W
6
2-2. DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing the water
temperature, selected washing temperature and laundry amount.
temperature, selected washing temperature and laundry amount.
2-3. WATER LEVEL CONTROL
This model adopts a pressure sensor which can sense the water level in the tub.
Water supply is stopped when the water level reach the preset level, then washing program proceeds.
Spinning does not proceed until the water in the tub reduces to a certain level.
water
temperature
washing time
rinse time
the best
washing
performance
washing
performance
spin rhythm, time
laundry
amount
FUZZY
LOGIC
selected
washing
washing
temperature
SENSING
EFFECT
PROCESSING
DETERMINATION
2-4. THE DOOR CAN NOT BE OPENED
While program is operating.
While Door Lock light is on.
7
3. PARTS IDENTIFICATION
Drawer
Drum
Door
Drain Hose
Adjustable Feet
Transit Bolts
Control Panel
Power Plug
Drain Pump Filter
Drain Plug
Lower Cover Cap
If the supply cord is damaged,
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
ACCESSORIES
Inlet hose(1EA) Option : Hot / Cold(2EA)
Spanner
8
4. INSTALLATION
INSTALLATION
The appliance should be installed as follows.
Check the conditions of installation area.
1. Check level ground.
On raised foundations or upper level homes, the
vibrations
can be caused by the type of flooring.
It may be
necessary to move
the
machine
to a different area in the home or have the floor
reinforced to properly support the operation of the unit.
2. Check for humidity or any foreign objects under the feet.
Clean the floor, there should be no foreign objects under the feet.
If the unit has foreign objects underneath the feet, this will prevent the unit from being leveled properly
and will cause
If the unit has foreign objects underneath the feet, this will prevent the unit from being leveled properly
and will cause
vibrations
and
slipping
.
Remove any foreign objects
, if any from underneath the machine and level unit properly.
See below for examples of foreign objects.
1
Open the box and check appliance condition.
2
horizontal
Carpet
Paper
Laminated
paper
Purchased
stopper
Base Packing
Washer
Spanner
This leveling (or spanner) wrench must
be used to remove the transit bolts
and level the unit. This should be kept
for future use.