DOWNLOAD LG F14A8JDS Service Manual ↓ Size: 81.2 MB | Pages: 64 in PDF or view online for FREE

• Just check cut-off.
• Check the operating time.

* Door Locking time : 

1~8

sec.

Check the time between from

input the power to parts

move up, then Door locked.

* Door Releasing time : 

25~100

sec.

Check the time between from off

the power to parts

move down, then Door released.

1

1

1

1

2

4 Lift and separate the cabinet cover.

1 Two screws are unscrewed and disassembly

cabinet cover.

2 The Door Lock S/W is disconnected form the

wiring connector and the strap.

NOTE: When assembling the CABINET
COVER, connect the Door S/W connector.

• V ~ U (8~11Ω )

• U ~ W (8~11Ω )

• W ~ V (8~11Ω )

• Common ~ Ha (5~15kΩ )

• Common ~ Hb (5~15kΩ )

1 Remove the back cover.
2 After loosening the bolt, Rotor, pull out the

rotor.

1 Remove the 6  bolts from the stator.
2 Disconnect the 2 connectors.

1 Remove the hinges (Damper) at the Tub.

3 The hinge at the base is pulled off. 

(In directions  of the arrow)

2 The Hinge(Damper) at the base is  pulled off by

pressing on the snaps at the sharp end.

1 Loosen the nut.
2 Remove washing heater by pulling out.

When assembling the washing heater, insert

the heater to heater clip on the bottom of tub

and check the position of wire color.

< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω

1 Disassembly Top Plate, Control Panel, 

Drawer Panel Assembly, Cabinet Cover 

Assembly, Lower Cover Assembly

4 Remove pump outlet hose.
5 Remove tub pump bellows.
6 Remove cap(Remaining Hose).
7 Disconnect the wiring.
8 Three screws are unscrewed from the cabinet.
9 Remove the pump to arrow direction.

• Rating : 220/240V 50Hz
• Resistant : 162~176Ω

Bellows

Pump

Hose

Circulation

Hose

Remaining

Hose

1 Remove washing heater.
2 Remove the foreign object(wire,coin,etc) by

inserting long bar in the hole.

1 Disassembly Back cover.

2 First Unscrew a screw and Pull the 

PWB assembly in direction of red arrow

3 Disconnect the wiring connector.

4 Twist the switch assembly, safety