DOWNLOAD LG F1496ADH Service Manual ↓ Size: 46.6 MB | Pages: 46 in PDF or view online for FREE

Does the load lean toward 

side, or is the load a few items?

Is the washing machine 

at an 

angle?

Adjust the height of washing
machine to be kept 

horizontally. 

( Page 7)

Is the laundry 

mixed?

The few items of clothing will clump together 
and their weight will be in one place on the drum,
throwing the weight off during spin mode.
So add some laundry to overcome UE error. 
And rearrange load to allow proper spinning.

Try 

rearranging the laundry in drum 

Or the laundry is 

separated by size, type, and color.

Separate by size, 

type and color

21

Is the drain hose kinked ?

Check drain hose for kink and 

.

Drain Hose

Is the 

clogged ?

Check & Clean 

.

This kind of accumulation on the drain filter not only
prevents proper drainage, but also will promote
bacteria growth and cause odors.
This drain filter should be cleaned once a month.

Open the Cover by coin or
finger(only new model)

Drain water by removing the
hose cap.

Disassemble the pump
filter by turning the filter
cap counterclockwise.

Filter clogged by foreign objects

Assemble & close cap

Clean the filter

22

Is the water coming in
drawer continuously ? 

Replace the 

Main PCB

.

After power off for 10 sec. and power on.
Does the water level over reference line and Is 

not

the water level frequency 25.5Khz or 26.1Khz ?

Or does 

not

the water level over reference line and is the water level frequency 25.5Khz or 26.1Khz? 

F1496VDP3 

Press  “

Spin

” and “

Pre Wash

”

Replace the 

Inlet Valve

assembly .

YES

If FE is displayed again, 
then replace the 

Pressure Switch

.

If FE is displayed again, 
then replace the 

Main PCB

.

Check the 

Air Chamber

and the 

Tube

(clogged).

NO

NO

YES

23

Is the air chamber and the tube clogged?

Replace the 

Main PCB

.

Is the 

Connector

connected correctly to

the 

Main PCB

and the 

Pressure Switch

?

Or is the 

Harness

alright ?

Reconnect or repair the 

Connector

.

Or replace the 

Harness

.

Check air chamber and remove the foreign material.

Replace the 

Pressure Switch

.

YES

YES

NO

Is the resistance of the 

Pressure Switch

out of range? 
[Pin1 ~ Pin3] 

21~23 • )

NO

NO

YES

24