LG F1480TDS / F1480TDS5 / F1480TDS6 Service Manual ▷ View online
51
• V ~ U (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
Motor Stator
U V W
Hall Sensor
Ha
Hb
Common
• Common ~ Ha (5~15kΩ)
• Common ~ Hb (5~15kΩ)
• Common ~ Hb (5~15kΩ)
1 Remove the housing coupled the TSG
(Connector, Hoses, Earth Screw)
2 Taking ou the screw of the TSG.
1 Remove the back cover.
2 After loosening the bolt, Rotor, pull out the
rotor.
1 Remove the 6 bolt from the stator.
2 Disconnect the 2 connectors.
2 Disconnect the 2 connectors.
1 Remove the hinges (Damper) at the Tub.
3 The hinge at the base is pulled off.
(To arrow direction)
2 The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
TSG (TURBO STEAM GENERATOR)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
< Heater for STEAM>
• Rating : 230V 1000W
• Resistant : 42.5~49.5Ω
• Rating : 230V 1000W
• Resistant : 42.5~49.5Ω
52
1 Disassembly Top Plate, Control Panel
Assembly, Drawer Panel Assembly,
Cabinet Cover Assembly, Lower Cover
Assembly.
Cabinet Cover Assembly, Lower Cover
Assembly.
2 Unscrew the screws from the Side
cover(Left).
1 Loosen the nut.
2 Remove washing heater by pulling out.
2 Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
the heater to heater clip on the bottom of tub
and check the position of wire color.
3 Lift and separate the Side(Left) cabinet cover.
4 Remove pump outlet hose.
5 Remove tub pump bellows.
6 Remove cap(Remaining Hose).
7 Disconnect the wiring.
8 Three screws are unscrewed from the cabinet.
PUMP
HEATER
• Rating : 220/240V 50Hz
• Resistant : 162~176Ω
• Resistant : 162~176Ω
< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
CAUTION
Bellows
Circulation
Hose
Hose
Pump
Hose
Remaining
Hose
9 Remove the pump to arrow direction.
53
1 Remove washing heater.
2 Remove the foreign object(wire,coin,etc) by
2 Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
1 Disassembly lower cover assembly.
2 Disassembly MAIN PWB ASSEMBLY
3 Disconnect the wiring connector.
Fist, Press hook and turn the safety switch
assembly switch assembly safety.
assembly switch assembly safety.
4 Unscrew one screw from the base.
SWITCH ASSEMBLY, SAFETY
2
1
10-1.THE PART LIST OF CABINET ASSEMBLY
10. EXPLODED VIEW AND PART LIST
33
A102
A104
A104
A101
A110
A100
A430
A410
A450
A455
A240
A200
A201
A220
A133
A440
A134
A135
A310
A300
A130
A131
A141
A103
A303
A151
A150
A152
A153
A140
A154
COLD (BLUE)
A276
A485
Click on the first or last page to see other F1480TDS / F1480TDS5 / F1480TDS6 service manuals if exist.