DOWNLOAD LG F1443KD6 Service Manual ↓ Size: 17.53 MB | Pages: 66 in PDF or view online for FREE

Rubber Cup

Check the horizontality with a level (Gage).

8

If washing machine legs are loose or not Screwed in, then 

with the spanner wrench. 

Using the level, level the washing machine from front to back and side to side.

Use the spanner wrench to adjust Legs until level and try the 

.

Perform a Rinse and Spin with some clothing in the machine.

To do this, put 2~3kg of clothing in the unit, turn on the unit, Select the Rinse+Spin 
and then start. When the unit reaches the spin cycle, watch for vibrations.
If the unit is vibrating, make small adjustments to the leg until they subside. (Repeat step 2)

the lock nut against the base of the machine to 

the 

.

Lower the foot until there is no gap between floor and foot.
And only use 

when difference at the leg adjustment is more than 

.

Place your right hand on the back, right corner and your left hand on the front,
left corner of the unit, then attempt to rock the unit from corner to corner.
Then, move your right hand to the front, right side and your left hand to the
back, left corner and attempt to rock the unit from corner to corner.

If the unit is level, it will not rock.  However, if the unit is not level, it will rock.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.

A level

Higher

Tighten

Adjustable feet

Tighten

Adjustable feet

Higher

Tighten

Adjustable feet

Lower

4620ER4002B
(Gray)

for Wooden floors

Rubber Cup

4620ER4002A
(Black)

for Tile floors

Lock nut

10mm

Adjustable bolt

Tighen the lock nut

Floor

No Gap

Floor

No Gap

Floor

Gap

Test operation

9

Preparation
for 
washing.

· Connect the power plug to the

outlet.

· Connect the inlet hose.   

Press the power button.

Press the START/PAUSE
button.

Check the water heating.

· Press the  left Option + temp

button simultaneously and the
present temperature will be
displayed. 

Page 20

· Check if the drum rotates

clockwise and  counterclockwise. 

Check automatic reverse turn.

Check the water supply.

· Check if water is supplied through

the detergent dispenser.

Check the drain and spin
functions.

· Turn power off and then power on.
· Select the spin rpm
· Press the START PAUSE button.
· Check the spin and drain

functions.

· Turn power off and then power on.
· Listen for a click to determine if the

door is unlocking.

Turn power off and open
the door.

Water removal.

· If SVC is needed during  check,

remove the remaining water by
pulling out the hose cap.

· In case of Coloreds program.

 Use this button to turn the

power On/Off.

 Rotate the Cycle selector

knob to select the cycle
designed for different
types of fabric and soil
levels.

 Use this button to Start/

Stop the washer.

 Time Delay : Allows the start of any cycle to be delayed

for 3~19 hours.

 Steam Wash : By pressing the Steam Wash button, if Steam

 Function is selected, the Steam Wash button will light up. 

 Favorite : Favorite program allows you to store a

  customized wash cycle for future use.

 Pre Wash : Use 

this option for load that needs protreatment.

  

Adds 17minutes pre wash and drain.

 Medic Rinse : For best results or for cleaner rinsing, you  can choose

  Medic Rinse option

 Rinse + Spin : This can be Helpful in preventing fresh stains from setting

  in fabrics.

 Time Save :  This option can be used to reduce the time of a wash program.

  To use this option press option button before wash program is started.

Intensive : If the laundry is heavily Soiled, ìIntensiveî option is effective.

Cycle Sele ctor

Additional programs

Power

Start/ Pause

Option Button

5. OPERATION (F1443KDS / F1243KDS(1~9))

  Use this option to prevent unwanted

use of the washer. Press and hold
Option left and right button for 3 seconds
to lock/unlock control. 

  When Child lock is set, CHILD LOCK

lights and all buttons are disabled
except the Power       button.  You can
lock the washer while it is operating.

 The Beep on/off function can be set by pressing

and holding the Option and Rinse button
simultaneouly.

 Select a water temperature based

on the type of load you are
washing. 

 By pressing the Rinse button, the

Rinse type can be selected.

 This display shows:

a) the estimated time remaining in the

cycle when operating.

 To change the spin speed, turn the

Spin knob to cycle through available
options.

Child Lock

EST. T ime remaining

Spin Selector knob

 Tub Clean course can be set by

pressing and holding Rinse and 
Temp button simultaneously.

 Tub Clean is a special cycle to

clean the inside of the washer.

Tub Clean

Beep on/off

Rinse, Temp. Button

 In case of abormal operation, error 

   indications are displayed.

(

)

• See troubleshooting 

ting

am.

e.