DOWNLOAD LG F1292QD / F1292QD5 / F1292QDP / F1292QDP1 / F1292QDP2 / F1292QDP5 / F1292QDP25 Service Manual ↓ Size: 15.07 MB | Pages: 44 in PDF or view online for FREE

Check the horizontality with a level (Gage).

8

If washing machine legs are loose or not screwed, then 

with the spanner wrench. 

Using the level, level the washing machine from front to back and side to side.

Using the spanner wrench to adjust leg for 

and try for 

.

Perform a Rinse and Spin with some clothing in the machine.

To do this, put 2~3kg of clothing in the unit, power on the unit, press the Rinse and Spin 
button, and then start. When the unit reaches the spin cycle, watch for vibrations.
If the unit is vibrating, make small adjustments to the leg until they subside. (Try 2Step again)

the lock nut against the base of the machine to 

the 

.

Lower the foot until there is no gap between floor and foot.
And only use 

when difference at the leg adjustment is more than 

.

Place your right hand on the back, right corner and your left hand on the front,
left corner of the unit, then attempt to rock the unit from corner to corner.
Then, move your right hand to the front, right side and your left hand to the
back, left corner and attempt to rock the unit from corner to corner.

If the unit is level, it will not rock.  However, if the unit is not level, it will rock.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.

A level

Higher

Tighten

Adjustable feet

Tighten

Adjustable feet

Higher

Tighten

Adjustable feet

Lower

Lock nut

10mm

Adjustable bolt

Tighen the lock nut

4620ER3001B
(Gray)

for Wooden floors

Rubber Cup

4620ER3001A
(Black)

for Tile floors

Test operation

9

Preparation
for washing.

· Connect the power plug to the

outlet.

· Connect the inlet hose.

Press the power button.

Press the START/PAUSE
button.

Check the water heating.

· Press “Temp.” button,

the present temperature will 
be displayed.

· Check if the drum rotates

clockwise and counterclockwise.

Check automatic reverse turn.

Check the water supply.

· Check if water is supplied through

the detergent dispenser.

Check drain and spin.

· Power off and then power on.

Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.

· Check drain and spin.

· Power off and then power on.
· Check if the door can be opened

after Door Lock lamp turns off.

Power off and open the door.

Water removal.

· If SVC is needed during check,

remove the remaining water by
pulling out the hose cap.

· In case of cotton program.

5. OPERATION

• 13 programs can be set

depending on the type of
the laundry.

• If the power button is

pressed, all lamps are on

• By turning the dial, [Cotton -

Cotton Quick - Synthetic -
Duvet - Bulky - Quick 30 -
Rinse+Spin - Spin - Delicate -
Hand Wash/Wool - Bio Care -
Boiling Care - Baby Care]
can be selected.
This is a bi-directional selector.

• Use the button to start or pause wash

cycle.

• The power turns off automatically 4

minutes after the pause button is
pressed.

•

Child Lock system can

be set and canceled by

pressing and holding

both 

button

and 

button

simultaneously more

than 3 seconds.

• Medic Rinse : Function that offers more purity in rinse operation by 

maintaining the optimum temperature for elimination of 

remnant detergent. It can be selected in all courses with the 

exception of Quick 30. Hand Wash/Wool, Delicate course.

•

Intensive : • If the laundry is heavily soiled “Intensive” option is effective.

• By selecting the Intensive option, the wash time may be 

extended, depending on the program selected.

• Pre Wash : If the laundry is heavily soiled, “Pre Wash” course is effective.

Pre Wash is available in Cotton and Synthetic Program.

• Crease Care : If you want to prevent crease, select this button with spin

5-1. F**92T /QD(P)(1~9)

Option

Child -Lock

Wash program selector

Start/Pause button

Medic 

      

Rinse

Pre Wash

F**92T/QD（P）(1~9)

• Press the button when reservation washing

is needed.

• When the button is pressed, [        ] is

displayed, maximum delay of [        ] hours
can be set.

• Each press advances time delay by the hour. 
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from

the present to the completion of washing.

• The Beep on/off function can be set by

pressing and holding the Time Delay button
(About 3 seconds).
The Beep on/off function can be set at any time
and it is automatically cancelled in the event of
a power cut.
The Beep on/off function also works when
power is off.

• Press the button to turn power on and off.
• Press the button to cancel the time delay.

Page 17

- Press and Hold ‘

’ & ‘

’ buttons and then press ‘

’ button.

- Press and Hold ‘

’ & ‘

’ buttons simultaneously.

• By pressing the Spin Button the spin speed

can be chosen

• F10**T/QD(1~9)   /WD-10810MDS

Rinse Hold/No spin/400/800/1000

• F12**T/QD(1~9)  ／

WD-12811MDS

Rinse Hold/No spin/400/800/1200

• F14**T/QD(1~9)

Rinse Hold/No spin/400/800/1400

• Display the estimated remaining time 

(Hour : Minute) to finish.

• In case of abnormal operation, error indications are

displayed.
(                                                                            )

• See troubleshooting guide.

• Press the button to select water temperature.
• 95°C is selected for Cotton and Baby Care

only.

• By pressing the button while operating the

washer, the present temperature is displayed.