DOWNLOAD LG F1280ND5 / F1280NDP25 Service Manual ↓ Size: 16.94 MB | Pages: 55 in PDF or view online for FREE

• Water supply is not adequate in area.
• Water supply taps are not completely

open.

• Water inlet hose(s) are kinked.
• The filter of the inlet hose(s) are clogged.

• Drain hose is kinked or clogged.
• The drain filter is clogged.

• Load is too small.
• Load is out of balance.
• The appliance has an imbalance

detection and correction system. If
individual heavy articles are loaded (ex.
bath mat, bath robe, etc.) this system
may stop spinning or even interrupt the
spin cycle altogether.

• If the laundry is still too wet at the end of

the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.

• Ensure door is not open.

• Water overfills due to the faulty water

valve.

• Water level sensor has malfunctioned.

• Over load in motor.

• The washer experienced a power failure.

• Water leaks.

Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.

Clean and straighten the drain hose.
Clean the drain filter.

Add 1 or 2 similar items to help 
balance the load.
Rearrange load to allow proper 
spinning.

Close the door completely.

If  “       ”is not released, call for service.

(    +44-(0) 844 847 LGLG(5454) )

Unplug the power plug and call for service.
(    +44-(0) 844 847 LGLG(5454) )

Close the water tap.
Unplug the power plug.
Call for service.
(    +44-(0) 844 847 LGLG(5454) )

Allow the washer to stand for
30minutes to allow the motor cool;
then restart the cycle.

Restart the cycle.

Call for service.
(    +44-(0) 844 847 LGLG(5454) )

7-6. TROUBLESHOOTING WITH ERROR

Is the water tap closed?

[Note] Environmental safety check list

1. No water tap leakage & freeze.

2. No entanglement of water supply hose.

3. No water shortage.

4. No water supply hose leakage.

5. No the inlet filter clogged.

Check the 

and  open it fully.

When there is water in the tub,

is the water level frequency

over 26.2KHz?

Reconnect or repair the 

.

Or replace the 

.

Replace the 

.

Check the 

and 

(clogged) 

And When you check the water level frequency again, 

if it is over 26.2KHz, you replace 

Replace the 

.

Is the each resistance of Inlet Valve within

3.5 ~4.5 kΩ ?

When the washing machine is started, 

is operated the inlet valve? 

Pre. Valve

Main Valve

AG Valve

Is the 

connected correctly to 

the 

and the 

?

Or is the 

alright ?

1

2

3

1

2

3

Does the load lean toward one

side, or is the load a few items?

Is the washing machine installed

at an angle?

Adjust the height of washing

machine to be kept horizontally. 

( Page 7)

Is the laundry mixed?

The few items of clothing will clump together 

and their weight will be in one place on the drum,

throwing the weight off during spin mode.

Try rearranging the laundry in drum 

Or the laundry is separated by size, type, and color.

Separate by size, 

type and color

Is the drain hose kinked ?

Check drain hose for kink and straighten the 

.

Drain Hose

Is the 

clogged ?

Check & Clean 

.

This kind of accumulation on the drain filter not only
prevents proper drainage, but also will promote
bacteria growth and cause odors.
This drain filter should be cleaned once a month.

Open the Cover by coin or

finger(only new model)

Drain water by removing the

hose cap.

Disassemble the pump

filter by turning the filter

cap counterclockwise.

Filter clogged by foreign objects

Assemble & close cap

Clean the filter