DOWNLOAD LG F1280FDS Service Manual ↓ Size: 38.29 MB | Pages: 56 in PDF or view online for FREE

Model
F1280FDS
Pages
56
Size
38.29 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
f1280fds.pdf
Date

LG F1280FDS Service Manual ▷ View online

9
Connect Drain Hose.
6
Connect power plug.
7
If the drain hose is not installed properly, the unit will not drain properly.
This allows water to back flow into the unit which can cause odors.
Refer to Owner Manual for proper drain hose installation.
The odor could also be coming from the home’s drain to which the drain hose is attached.
In this type of drain hose installation, the odor could be coming from the standpipe.
This odor can come up the drain hose and into the unit.
Pour a cup or two of bleach or vinegar down the home drain 
and let it sit for 24 hours before running another cycle.
This will help eliminate odor from the home drain. 
If a cycle is started too soon after doing this, it will not help the issue.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, 
it may be the cause of a fire.
about 100 cm
about 145 cm
about 105 cm
Laundry tub
Max. 100cm
min. 60cm
Max. 100cm
min. 60cm
Retainer
Tie
strap
Hose
min. 60 cm
max. 100 cm
Check the horizontality with a level (Gage).
8
1 Step
If washing machine legs are loose or not screwed, then 
screw up
with the spanner wrench. 
Using the level, level the washing machine from front to back and side to side.
2 Step
Using the spanner wrench to adjust leg for 
horizontality
and try for 
Diagonal test
.
3 Step
Perform a Rinse and Spin with some clothing in the machine.
To do this, put 2~3kg of clothing in the unit, power on the unit, press the Rinse and Spin 
button, and then start. When the unit reaches the spin cycle, watch for vibrations.
If the unit is vibrating, make small adjustments to the leg until they subside. (Try 2Step again)
4 Step
Tighten
the lock nut against the base of the machine to 
lock
the 
position leg
.
Lower the foot until there is no gap between floor and foot.
And only use 
adjustment rubber
when difference at the leg adjustment is more than 
10mm
.
Place your right hand on the back, right corner and your left hand on the front,
left corner of the unit, then attempt to rock the unit from corner to corner.
Then, move your right hand to the front, right side and your left hand to the
back, left corner and attempt to rock the unit from corner to corner.
If the unit is level, it will not rock.  However, if the unit is not level, it will rock.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.
How to perform a diagonal test:
A level
Higher
Tighten
Adjustable feet
Diagonal test
Tighten
Adjustable feet
Higher
Tighten
Adjustable feet
Lower
Lock nut
10mm
Adjustable bolt
Tighen the lock nut
4620ER3001B
(Gray)
for Wooden floors
Rubber Cup
4620ER3001A
(Black)
for Tile floors
10
Test operation
9
11
1
Preparation
for 
washing.
· Connect the power plug to the
outlet.
· Connect the inlet hose.   
2
Press the power button.
3
Press the START/PAUSE
button.
6
Check the water heating.
· Press the Rinse+Medic Rinse
button simultaneously and the
present temperature will be
displayed. 
Page 13
· Check if the drum rotates
clockwise and  counterclockwise. 
5
Check automatic reverse turn.
4
Check the water supply.
· Check if water is supplied through
the detergent dispenser.
7
Check drain and spin.
· Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
· Check drain and spin.
· Power off and then power on.
· Check if the door can be
opened after 3 minutes.
8
Power off and open the
door.
9
Water removal.
· If SVC is needed during  check,
remove the remaining water by
pulling out the hose cap.
· In case of Coloreds program.
12
5. OPERATION
Use this button to turn the
power On/Off.
Rotate the Cycle selector
knob 
to select the cycle
designed for different
types of fabric and soil
levels.
Use this button to Start/
Stop the washer.
Time Delay : Allows the start of any cycle to be delayed
for 3~19 hours.
Steam Wash : By pressing the Steam Wash button,
Steam Function is selected, light on Steam Wash button.
Favorite : Favorite program allows you to store a 
customized wash cycle for future use.
Pre Wash : Use this option for load that need pretreatment. 
Add 16 minutes pre sash and drain.
Medic Rinse : For best results or for cleaner rinsing, you can choose 
Medic Rinse option
Rinse + Spin : This can be gepful in preventing fresh stains from setting
in fabrics.
Time Save : This option can be used to reduce the time of a wash program. 
To use this option press option button before wash program is started.
Cycle Selecto r
Additional pro g rams
Power
Start/Pause
Option Button
Intensive : If the laundry is heavily soiled " Intensive" option is effective.
Page of 56
Display

Click on the first or last page to see other F1280FDS service manuals if exist.