LG F12601D / F12606D5 Service Manual ▷ View online
6
3. PARTS IDENTIFICATION
Drawer
Door
Adjustable Feet
Power Plug
Control Panel
Drain Pump Filter
Drain Plug
Lower cover cap
If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
service agents or a
similarly qualified
person in order to
avoid a hazard.
damaged, it must be
replaced by the
manufacturer or its
service agents or a
similarly qualified
person in order to
avoid a hazard.
ACCESSORIES
Inlet hose(1EA) Option : Hot / Cold(2EA)
Spanner
Drum
Lower cover
(For datergent and
fabric softener)
fabric softener)
7
4. INSTALLATION
1
2
3
4
5
6
Before servicing ask the customer what the trouble is.
Check the adjustments. (Power supply :220-240V~, Removal of transit bolts etc..)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works O·Kor NOT.
Check the adjustments. (Power supply :220-240V~, Removal of transit bolts etc..)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works O·Kor NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
Remove the transit bolts
(4EA: ) with supplied
wrench.
(4EA: ) with supplied
wrench.
Keep the transit bolts and
wrench for future use.
wrench for future use.
Insert the 4 caps provided
into the hole.
into the hole.
1
The appliance goes up by
rotating the feet clockwise.
rotating the feet clockwise.
The appliance comes
down by rotating the feet
counter-clockwise.
down by rotating the feet
counter-clockwise.
Turn the adjustable feet to
set the appliance
horizontally.
set the appliance
horizontally.
Low
High
REMOVE THE TRANSIT
BOLTS
INSTALL THE APPLIANCE ON
FLAT AND FIRM SURFACE
ADJUST THE
HORIZONTAL
8
HOW TO CONNECT INLET HOSE
CONNECT DRAIN HOSE
· Make sure that the hose is not twisted.
CONNECT POWER PLUG
※ The drain hose should be placed under 100cm from the floor.
· Avoid submerging the end of the hose.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices,
It may be the cause of a fire.
Check that the rubber is the inside of valve connector.
Connect inlet hoses firmly to prevent leak.
9
7 TEST OPERATION
1
Preparation
for washing.
for washing.
· Connect the power plug to the
outlet.
· Connect the inlet hose.
2
Press the power button.
3
Press the START/PAUSE
button.
button.
6
Check the water heating.
· Press both Time Delay and
Pre Wash buttons simultaneously
the present temperature will be
displayed.
the present temperature will be
displayed.
· Check if the drum rotates
clockwise and counterclockwise.
5
Check automatic reverse turn.
4
Check the water supply.
· Check if water is supplied through
the detergent dispenser.
7
Check drain and spin.
· Power off and then power on.
Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.
the Start/Pause button and Start
the machine again.
· Check drain and spin.
· Power off and then power on.
· Check if the door can be opened
· Check if the door can be opened
after Door Lock lamp turns off.
8
Power off and open the door.
9
Water removal.
· If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
pulling out the hose cap.
· In case of cotton program.
Click on the first or last page to see other F12601D / F12606D5 service manuals if exist.