LG F1258RDS6 Service Manual ▷ View online
32
① Disassemble the top plate assembly.
② Pull out the drawer.
③ Push out the DISPENSER ASSEMBLY
after unscrew 2 screws.
① Unscrew the nut at the lower part of the
dispenser.
① Disassemble the 4 or 5 connectors from
the valves.
① Unscrew 1 screw from the top bracket.
② Disassemble 2 connectors.
① White Housing(BK-WH/BK)
② Red Housing(BK-VI/BK)
③ Blue Housing(BK-YL/BK)
④ Blue Housing(BK-GY/BK)
② Unscrew 2 or 4 screws from the back of
the cabinet.
Connectors
4
3
1
2
Dry
Steam
33
①
① Unscrew the 5 screws from upper of the canbinet
cover.
②
② Unscrew the screw from filter cover.
③
③ Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
④
④ Unscrew the screw from the lower side of the cabinet
cover.
CABINET COVER
34
⑩
⑩ Open the door.
⑪
⑪ Disassemble the clamp assembly.
⑫
⑫ Tilt the cabinet cover.
⑬
⑬ Disconnect the door switch connector.
※
※ NOTE: When assembling the CABINET
COVER, connect the connector.
⑭
⑭ Lift and separate the cabinet cover.
35
DOOR
DOOR LOCK SWITCH ASSEMBLY
HOW TO ASSEMBLE THE MOTOR
①
① Open the door.
②
② Remove the two screws from the Hinge.
※ When removing the Door Assembly, it is necessary
to hold the Bracket that is inner of the cabinet cover.
①
① Open the door and disassemble the CLAMP
ASSEMBLY.
②
② Unscrew the 2 screws.
※
※ Be careful! The door is heavy.
※
※ NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
Click on the first or last page to see other F1258RDS6 service manuals if exist.