DOWNLOAD LG F1222SD / F1222SDR Service Manual ↓ Size: 2.13 MB | Pages: 36 in PDF or view online for FREE

7 TEST OPERATION

Preparation
for washing.

· Connect the power plug to the

outlet.

· Connect the inlet hose.

Press the power button.

Press the START/PAUSE
button.

Check the water heating.

· Press both Time Delay and 

Pre Wash buttons simultaneously
the present temperature will be
displayed.

· Check if the drum rotates

clockwise and counterclockwise.

Check automatic reverse turn.

Check the water supply.

· Check if water is supplied through

the detergent dispenser.

Check drain and spin.

· Power off and then power on.

Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.

· Check drain and spin.

· Power off and then power on.
· Check if the door can be opened

after Door Lock lamp turns off.

Power off and open the door.

Water removal.

· If SVC is needed during check,

remove the remaining water by
pulling out the hose cap.

· In case of cotton program.

5. OPERATION

• 13 programs can be set

depending on the type of

the laundry.

• If the power button is

pressed, all lamps are on

• By turning the dial, [Cotton -

Cotton Quick - Synthetic -

Duvet - Bulky - Quick 30 -

Rinse+Spin - Spin - Delicate -

Hand Wash/Wool - Bio Care -

Boiling Care - Baby Care]

can be selected.

(The opposite is possible)

• Display the estimated remaining time (Hour : Minute)

to finish.

• In case of abnormal operation, error indications are

displayed.

(                                                                            )

• See troubleshooting guide.

• Use the button to start or pause wash

cycle.

• The power turns off automatically 4

minutes after the pause button is

pressed.

• By pressing the Spin Button the spin speed can

be chosen

• F10**ND(1~9)

Rinse Hold/No spin/400/800/1000

• F12**ND(1~9)

Rinse Hold/No spin/400/800/1200

• Press the button when reservation washing is needed.
• When the button is pressed, [        ] is displayed, maximum delay of [        ] hours can be set.
• Each press advances time delay by the hour. 
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from the present to the completion of washing.
• The Beep on/off function can be set by pressing and holding the Time Delay button (About 3 seconds).

The Beep on/off function can be set at any time and it is automatically cancelled in the event of a power cut.
The Beep on/off function also works when power is off.

• Child Lock system can be set and

canceled by pressing and holding both
Medic Rinse button and Pre Wash
button simultaneously more than 3
seconds.

• Tub Clean course can be set by

pressing and holding Intensive and
Crease Care button simultaneously.

• Tub Clean is special cycle to clean

the inside of the washer.

• Medic Rinse : Function that offers more purity in rinse operation by maintaining the optimum

temperature for elimination of remnant detergent. It can be selected in all courses with 
the exception of Quick 30. Hand Wash/Wool, Delicate course.

• Intensive : • If the laundry is heavily soiled “Intensive” option is effective.

• By selecting the Intensive option, the wash time may be extended, depending on the

program selected.

• Pre Wash : If the laundry is heavily soiled, “Pre Wash” course is effective.

Pre Wash is available in Cotton and Synthetic Program.

• Crease Care : If you want to prevent crease, select this button with spin

• Press the button to turn power on

and off.

• Press the button to cancel the

time delay.

- Press Temp. and Spin and Power buttons simultaneously

- Press 

and 

simultaneously

• 9 program can be set depending on the type of the

laundry.

• If the power button is pressed, Cotton program is

automatically set.

• By turning the dial, [Cotton - Cotton Quick - Synthetic -

Delicate - Wool/Silk - Hand Wash - Quick 30 - Duvet
- Baby Care] can be selected. 
(The opposite is possible)

• Display the estimated remaining time

(Hour : Minute) to finish.

• In case of abnormal operation, error indications are

displayed.

(                                                              )

• See troubleshooting guide.

• Use the button to start or pause

wash cycle.

• The power turns off

automatically 4 minutes after

the pause button is pressed.

• If the laundry is heavily

soiled “Intensive” option is
effective.

• By selecting the Intensive

option, the wash time may
be extended, depending on
the program selected.

• This option is not available

with Quick 30 program

• By pressing the

Rinse button, the
Rinse type can be
selected.

• By pressing the Spin Button the spin speed

can be chosen

• F10**ND(1~9)

No Spin/400/600/800/1000

• F12**ND(1~9)

No Spin/400/800/1000/1200