DOWNLOAD LG F1222NDP / F1222NDP25 Service Manual ↓ Size: 4.06 MB | Pages: 34 in PDF or view online for FREE

1⃞ Before servicing ask the customer what the trouble is.
2⃞ Check the adjustments. (Power supply :220-240V~, Removal of transit bolts etc..)
3⃞ Check the troubles referring to the troubleshooting.
4⃞ Decide service steps referring to disassembly  instructions.
5⃞ Then, service and repair.
6⃞ After servicing, operate the appliance to see whether it works O·K or NOT.

■ STANDARD INSTALLATION

The appliance should be installed as follows.

REMOVE THE TRANSIT 

INSTALL THE  APPLIANCE

ADJUST THE 

BOLTS

ON FLAT AND FIRM SURFACE

HORIZONTAL

Remove the transit bolts

Turn the adjustable feet to

(4EA:

①) with supplied wrench. 

set the appliance horizontally.

Keep the transit bolts and  

wrench for future use.

Insert the 4 caps provided 

into the hole.

The appliance goes up by 

rotating the feet clockwise. 

The appliance comes down by

rotating the feet counter-

clockwise.

4. INSTALLATION 

1

■ HOW TO CONNECT INLET HOSE

Check that the rubber is the inside of valve connector.

Connect inlet hoses firmly to prevent leak.

■ CONNECT DRAIN HOSE

■ CONNECT POWER PLUG

· Make sure that the hose is not twisted.

※ The drain hose should be placed under 100cm from the floor.

· Connect the power plug to the wall outlet.

· Avoid connecting several electric devices, 

It may be the cause of a fire.

· Avoid submerging the end of the hose.

TEST OPERATION

Connect the power plug to

In case of cotton program.      

the outlet.

Connect the inlet hose.   

Preparation for 

Press the power button.

Press the START/PAUSE

washing.

button.

·Press both Time Delay and

Pre Wash buttons simultaneously

the present temperature will be

displayed.

·Check if the drum rotates clockwise

and counterclockwise.

·Check if water is supplied through

the detergent dispenser.

·Power off and  then power on.
·Check if the door can be 

opened after Door Lock lamp

turns off.

·Power off and then power on.

Turn on Spin lamps after
pressing the Start/Pause button
and Start the machine again.

·Check drain and spin.

·If SVC is needed during 

check, remove

the remaining water by pulling 

out the hose cap.

Check the water heating.

Check automatic reverse

Check the water supply.

turn.

Check drain and spin 

Power off and open the 

Water removal 

door

5. OPERATION

Child Lock system can be set and canceled by pressing 
and holding both Medic Rinse button and Pre Wash button
simultaneously more than 3 seconds.
Once Child Lock is set, all buttons are not functioning
except power button.
Child Lock system can be set anytime even during 
Power-off and operation.
It is automatically cancelled when an operational error occur.

10 programs can be set
depending on the type of the
laundry.
If the power button is pressed,
all lamps are on
By turning the dial, [Cotton –
Cotton Quick – Synthetic –
Bedcover – Bulky – Quick 30 –
Rinse+Spin – Spin – Delicate –
Hand Wash/Wool, Bio Care –
Boiling Care – Baby Care] can
be selected.
(The opposite is possible)

: Function that offers more purity in rinse operation by maintaining the optimum temperature for

elimination of remnant detergent. It can be selected in all courses with the exception of Quick
30. Hand Wash/Wool, Delicate course.

: • If the laundry is heavily soiled “Intensive” option is effective.

• By selecting the Intensive option, the wash time may be extended, depending on the program selected.

: If the laundry is heavily soiled, “Pre Wash” course is effective.

Pre Wash is available in Cotton and Synthetic Program.

: If you want to prevent crease, select this button with spin