LG F10B9QDT Service Manual ▷ View online
28
Disassemble the Hall Sensor
1) Disassemble the hook of Hall Sensor by (-) driver.
2) Pull up Hall Sensor slowly as shown in picture.
1) Adjust the hole of Hall Sensor to
the hooks of stator as picture.(red circled)
2) Push down the Hall sensor,
and assemble to the hook for sure.
Caution
If you disassemble by force,not following the directions,
the hooks of stator(red circled) might broke up.
Hence need change of stator assembly.
So disassemble cautiously.
1
Assemble the Hall Sensor
2
[Note]
Hall Sensor Part No.
• 24” / 25” : 6501KW2001A
• 27” : 6501KW2002A
29
No Power
Is the Power Plug connected
firmly to the power outlet?
And is the supply voltage
220~240V AC?
firmly to the power outlet?
And is the supply voltage
220~240V AC?
Is
Red LED ON
while power supplied ?
Is Multi-plug socket used ?
NO
NO
NO
YES
YES
YES
NO
Is the connectors connected
Correctly to the Display
PCB?
Correctly to the Display
PCB?
Is the
Connector
connected correctly to
the
Main PCB
and the
Noise Filter
?
Or is the
Harness
alright ?
B
C
P
r
e
tl
i
F
e
s
i
o
N
Reconnect
Power Plug
firmly.
Check the fuse or
reset the circuit breaker.
reset the circuit breaker.
Don’t use
Multi-plug
socket.
Use
Single Plug
socket for
washing machine.
YES
YES
Reconnect or repair the
Connector
.
Or replace the
Harness
.
Check connectors otherwise.
Replace
Replace
Display PCB
.
Check and replace
Main PCB
.
8. TROUBLESHOOTING WITHOUT ERROR CODES
30
Vibration & Noise In Spin
Have all the
Transit Bolts
and the
Base Packing
been removed?
NO
Remove the
Transit Bolts
and
the
Base Packing
.
Washer
Packing Support
YES
Refer to INSTALLATION . (Page 7)
Clean the drawer and dispenser.
Check point
31
Detergent & Softener does not flow in
Is detergent & softener put in
the correct compartment of the drawer?
the correct compartment of the drawer?
NO
Refer to [Water Inlet Error (IE) ]
(page 21)
NO
Put it in the
Correct Position
.
Reference (Amount of Detergent & Softener)
Detergent
NO!!
OK!!
YES
YES
Is water supplied?
Is the
Detergent
caked or hardened ?
Main Wash
(Powder)
YES
Softener
YES
Main Wash
(Powder)
Pre Wash
(Powder)
Only
softener
Click on the first or last page to see other F10B9QDT service manuals if exist.