DOWNLOAD LG F1066LR / F1066LR1 Service Manual ↓ Size: 1.91 MB | Pages: 34 in PDF or view online for FREE

HOW TO CONNECT INLET HOSE

Check that the rubber washer is the inside of the

valve connector.

Connect inlet hose firmly to prevent leak.

CONNECT DRAIN HOSE

CONNECT POWER PLUG

Make sure that the hose is not twisted.

The drain hose should be placed under 100cm from the floor.

Connect the power plug to the wall outlet.

Avoid connecting several electric devices, 

It may be the cause of a fire.

Avoid submerging the end of the hose.

TEST OPERATION

Connect the power plug to

In case of cotton program.      

the outlet.

Connect the inlet hose.   

Preparation for 

Press the power button.

Press the START/PAUSE

washing.

button.

Power off and  then power on.
Check if the door can be 
opened after 2 minutes.

Press the Start/Pause button
after selecting Pump button by
pressing Program button.

If SVC is needed during 

check, remove

the remaining water by pulling 

out the hose cap.

Check the water heating.

Check automatic reverse

Check the water supply.

turn.

Check drain and spin 

Power off and open the 

Water removal 

door

Check if the drum rotates  

Check if water is supplied

clockwise and  counterclockwise.  

through the detergent dispenser.

10

5. OPE R ATION

W ater   temper atur e
selector

P ress the button to select
water temperature.
T he water temperature 

[60 C  

95 C

C old 

40 C ] can be

selected in C otton. 

95 C   is selected for C otton
and B aby C are.

O ption

R ins e+

Used to additional rinse, which may
assist in removing traces of detergent
residue.

  B y selecting R inse+ function, the rinse

time and the rinse water are increased.

P re  Was h

If the laundry is heavily soiled, "P re
Wash" course is effective.
P re Wash is available in C otton and
S ynthetic P rogram.

L E D   display

  Display the program

procedure(Wash, R inse,
S pin, C hild Lock).

  S ee troubleshooting guide.

C hild  -  lock

NOT E

If the P rogram lamps are blinked at the same time after the 
power off or the end of the washing, the child lock mode is set. 
C ancel the child lock mode by pressing the [Temp.] and the [ Option]
button simultaneously for 3 seconds.

C hild Lock system can be set and canceled by pressing both
[Temp.] and [Option] button simultaneously for 3 seconds.
Once C hild Lock is set, all buttons are not functioning except
power button.
C hild Lock system can be set anytime even during P ower-off
and operation.
It is automatically cancelled when an operational error occurs. 

In case of abnormal 
operation, error indications
are displayed.

Start/Pause button

Use the button to start or pause

wash cycle.
The power turn off automatically

4 minutes after the pause button

is pressed.

Spin

WD-10660N

Rinse Hold   No Spin   400
 

 

1000

WD- 80660N

Rinse Hold   No Spin   400
  800

Option

Wash pr ogram selector

8 programs can be set depending on the type of the laundry.
By turing the dial 

 

[Cotton   Baby Care   Synthetic   Delicate  
Hand Wash/Wool   Quick 30   Rinse+Spin   Spin]
can be selected.

Power button

Press the button to turn

on and off.

If you want to prevent crease,

select this button with spin speed.

  If you want to eliminate protein

stains(milk, blood, chocolate...), 

you may select Bio by pressing the

option button.[You can select Bio

when temperature is higher than

60℃ in Cotton, Synthetic and Baby

Care.]