DOWNLOAD LG F1022ND Service Manual ↓ Size: 7.49 MB | Pages: 36 in PDF or view online for FREE

Model
F1022ND
Pages
36
Size
7.49 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
f1022nd.pdf
Date

LG F1022ND Service Manual ▷ View online

8
HOW TO CONNECT INLET HOSE
CONNECT DRAIN HOSE
· Make sure that the hose is not twisted.
CONNECT POWER PLUG
※ The drain hose should be placed under 100cm from the floor.
· Avoid submerging the end of the hose.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices,
It may be the cause of a fire.
Check that the rubber is the inside of valve connector.
Connect inlet hoses firmly to prevent leak.
9
7 TEST OPERATION
1
Preparation
for washing.
· Connect the power plug to the
outlet.
· Connect the inlet hose.
2
Press the power button.
3
Press the START/PAUSE
button.
6
Check the water heating.
· Press both Time Delay and 
Pre Wash buttons simultaneously
the present temperature will be
displayed.
· Check if the drum rotates
clockwise and counterclockwise.
5
Check automatic reverse turn.
4
Check the water supply.
· Check if water is supplied through
the detergent dispenser.
7
Check drain and spin.
· Power off and then power on.
Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.
· Check drain and spin.
· Power off and then power on.
· Check if the door can be opened
after Door Lock lamp turns off.
8
Power off and open the door.
9
Water removal.
· If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
· In case of cotton program.
5. OPERATION
Wash program selector
• 13 programs can be set
depending on the type of
the laundry.
• If the power button is
pressed, all lamps are on
• By turning the dial, [Cotton -
Cotton Quick - Synthetic -
Duvet - Bulky - Quick 30 -
Rinse+Spin - Spin - Delicate -
Hand Wash/Wool - Bio Care -
Boiling Care - Baby Care]
can be selected.
(The opposite is possible)
LED display
• Display the estimated remaining time (Hour : Minute)
to finish.
• In case of abnormal operation, error indications are
displayed.
(                                                                            )
• See troubleshooting guide.
Start/Pause button
• Use the button to start or pause wash
cycle.
• The power turns off automatically 4
minutes after the pause button is
pressed.
Spin Button
• By pressing the Spin Button the spin speed can
be chosen
• F10**ND(1~9)
Rinse Hold/No spin/400/800/1000
• F12**ND(1~9)
Rinse Hold/No spin/400/800/1200
10
11
Time Delay & Beep ON/OFF
• Press the button when reservation washing is needed.
• When the button is pressed, [        ] is displayed, maximum delay of [        ] hours can be set.
• Each press advances time delay by the hour. 
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from the present to the completion of washing.
• The Beep on/off function can be set by pressing and holding the Time Delay button (About 3 seconds).
The Beep on/off function can be set at any time and it is automatically cancelled in the event of a power cut.
The Beep on/off function also works when power is off.
Child -Lock
• Child Lock system can be set and
canceled by pressing and holding both
Medic Rinse button and Pre Wash
button simultaneously more than 3
seconds.
Tub Clean
• Tub Clean course can be set by
pressing and holding Intensive and
Crease Care button simultaneously.
• Tub Clean is special cycle to clean
the inside of the washer.
Option
• Medic Rinse : Function that offers more purity in rinse operation by maintaining the optimum
temperature for elimination of remnant detergent. It can be selected in all courses with 
the exception of Quick 30. Hand Wash/Wool, Delicate course.
• Intensive : • If the laundry is heavily soiled “Intensive” option is effective.
• By selecting the Intensive option, the wash time may be extended, depending on the
program selected.
• Pre Wash : If the laundry is heavily soiled, “Pre Wash” course is effective.
Pre Wash is available in Cotton and Synthetic Program.
• Crease Care : If you want to prevent crease, select this button with spin
Power button
• Press the button to turn power on
and off.
• Press the button to cancel the
time delay.
QC Test Mode 
- Press Temp. and Spin and Power buttons simultaneously
Water level frequency buttons 
- Press 
Intensive
and 
Crease Care
simultaneously
Page of 36
Display

Click on the first or last page to see other F1022ND service manuals if exist.