DOWNLOAD LG F1022ND Service Manual ↓ Size: 7.49 MB | Pages: 36 in PDF or view online for FREE

Model
F1022ND
Pages
36
Size
7.49 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
f1022nd.pdf
Date

LG F1022ND Service Manual ▷ View online

7
4. INSTALLATION
1
2
3
4
5
6
Before servicing ask the customer what the trouble is.
Check the adjustments. (Power supply :220-240V~, Removal of transit bolts etc..)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works O·Kor NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
Remove the transit bolts
(4EA:     ) with supplied
wrench.
Keep the transit bolts and
wrench for future use.
Insert the 4 caps provided
into the hole.
1
The appliance goes up by
rotating the feet clockwise.
The appliance comes
down by rotating the feet
counter-clockwise.
Turn the adjustable feet to
set the appliance
horizontally.
Low
High
REMOVE THE TRANSIT
BOLTS
INSTALL THE APPLIANCE ON
FLAT AND FIRM SURFACE
ADJUST THE
HORIZONTAL
8
HOW TO CONNECT INLET HOSE
CONNECT DRAIN HOSE
· Make sure that the hose is not twisted.
CONNECT POWER PLUG
※ The drain hose should be placed under 100cm from the floor.
· Avoid submerging the end of the hose.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices,
It may be the cause of a fire.
Check that the rubber is the inside of valve connector.
Connect inlet hoses firmly to prevent leak.
9
7 TEST OPERATION
1
Preparation
for washing.
· Connect the power plug to the
outlet.
· Connect the inlet hose.
2
Press the power button.
3
Press the START/PAUSE
button.
6
Check the water heating.
· Press both Time Delay and 
Pre Wash buttons simultaneously
the present temperature will be
displayed.
· Check if the drum rotates
clockwise and counterclockwise.
5
Check automatic reverse turn.
4
Check the water supply.
· Check if water is supplied through
the detergent dispenser.
7
Check drain and spin.
· Power off and then power on.
Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.
· Check drain and spin.
· Power off and then power on.
· Check if the door can be opened
after Door Lock lamp turns off.
8
Power off and open the door.
9
Water removal.
· If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
· In case of cotton program.
5. OPERATION
Wash program selector
• 13 programs can be set
depending on the type of
the laundry.
• If the power button is
pressed, all lamps are on
• By turning the dial, [Cotton -
Cotton Quick - Synthetic -
Duvet - Bulky - Quick 30 -
Rinse+Spin - Spin - Delicate -
Hand Wash/Wool - Bio Care -
Boiling Care - Baby Care]
can be selected.
(The opposite is possible)
LED display
• Display the estimated remaining time (Hour : Minute)
to finish.
• In case of abnormal operation, error indications are
displayed.
(                                                                            )
• See troubleshooting guide.
Start/Pause button
• Use the button to start or pause wash
cycle.
• The power turns off automatically 4
minutes after the pause button is
pressed.
Spin Button
• By pressing the Spin Button the spin speed can
be chosen
• F10**ND(1~9)
Rinse Hold/No spin/400/800/1000
• F12**ND(1~9)
Rinse Hold/No spin/400/800/1200
10
Page of 36
Display

Click on the first or last page to see other F1022ND service manuals if exist.