LG F1003NDP Service Manual ▷ View online
27
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
When reconnecting the connector
INLET VALVE
3
2
4
1
VALVE
(STEAM)
VIOLET/BLACK-BLACK
VALVE
(PRE-WASH)
WHITE/BLACK-BLACK
VALVE
(NORMAL-WASH) GRAY/BLACK
VALVE
(HOT)
BLACK/WHITE
① Open the door completely.
② Remove the three screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
the Cabinet Cover.
Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
DOOR
CAP
(REMAINING HOSE)
Removing method of remained water
28
PANEL ASSEMBLY, CONTROL
③
Unscrew the screws from the lower cover.
②
The cabinet cover clamp is removed by special jig for
service and the gasket is released.
③
Two screws are unscrewed.
④
Unscrew all the screws on the upper and lower sides
of the CABINET COVER.
① The plate assembly(Top) is disassembled.
② Pull out the drawer and unscrew 2 screws.
③ Lift the side the Control Panel Assembly and
pull it out
①
Two screws is unscrewed.
②
Push out PANEL ASSEMBLY,CONTROL after Push
the hook(
①, ②
) below.
29
①
Lift and separate the cabinet cover.
① The cabinet cover clamp is removed and the
gasket is released.
② Two screws are unscrewed.
③ The Door Lock S/W is disconnected form the
wiring connector and the strap.
SWITCH ASSY, DOOR LOCK
※
※ NOTE: When assembling the CABINET
COVER, connect the Door S/W connector.
30
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
① Remove the hinges (Damper) at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
HOW TO ASSEMBLE THE MOTOR
TSG (TURBO STEAM GENERATOR)
① Remove the housing coupled the TSG
(Connector, Hoses, Earth Screw)
② Taking ou the screw of the TSG.
[F1*03TDSP]
Click on the first or last page to see other F1003NDP service manuals if exist.