LG F1003NDP Service Manual ▷ View online
26
• T he lower cover is removed.
• Two screw is unscrewed.
• P ull the P WB assembly(Main) to arrow
• Two screw is unscrewed.
• P ull the P WB assembly(Main) to arrow
direction
• One screws is unscrewed.
• T he cover of P WB assembly(Main) is
• T he cover of P WB assembly(Main) is
removed.
• Disconnect connector from the wiring.
• T he plate assembly(Top) are disassembled.
• P ull the drawer to arrow direction.
• Two screws are unscrewed.
• P ull the drawer to arrow direction.
• Two screws are unscrewed.
• T he hose clamps and the hose are
disassembled.
• T he ventilation bellows are disassembled on
the tub.
P WB A S S E MB L Y (MA IN)
DIS P E NS E R A S S E MB L Y
Dispenser assembly
Option
DR AWE R
27
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
When reconnecting the connector
INLET VALVE
3
2
4
1
VALVE
(STEAM)
VIOLET/BLACK-BLACK
VALVE
(PRE-WASH)
WHITE/BLACK-BLACK
VALVE
(NORMAL-WASH) GRAY/BLACK
VALVE
(HOT)
BLACK/WHITE
① Open the door completely.
② Remove the three screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
the Cabinet Cover.
Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
DOOR
CAP
(REMAINING HOSE)
Removing method of remained water
28
PANEL ASSEMBLY, CONTROL
③
Unscrew the screws from the lower cover.
②
The cabinet cover clamp is removed by special jig for
service and the gasket is released.
③
Two screws are unscrewed.
④
Unscrew all the screws on the upper and lower sides
of the CABINET COVER.
① The plate assembly(Top) is disassembled.
② Pull out the drawer and unscrew 2 screws.
③ Lift the side the Control Panel Assembly and
pull it out
①
Two screws is unscrewed.
②
Push out PANEL ASSEMBLY,CONTROL after Push
the hook(
①, ②
) below.
29
①
Lift and separate the cabinet cover.
① The cabinet cover clamp is removed and the
gasket is released.
② Two screws are unscrewed.
③ The Door Lock S/W is disconnected form the
wiring connector and the strap.
SWITCH ASSY, DOOR LOCK
※
※ NOTE: When assembling the CABINET
COVER, connect the Door S/W connector.
Click on the first or last page to see other F1003NDP service manuals if exist.