LG F071068QD2 Service Manual ▷ View online
Clean the drawer and dispenser.
Check point
YES
40
Water Leak
Is detergent & softener put in
the correct compartment of the drawer?
NO
Put it in the
Correct Position
.
Replace the
Dispenser Tray
.
Reference (Amount of Detergent & Softener)
Detergent
NO!!
OK!!
Is the
Dispenser Tray
Damaged or warped?
1. Water Leak from Dispenser
Is the
Detergent
caked or hardened?
Main Wash
(Powder)
Pre Wash
(Powder)
Only
softener
Softener
YES
YES
NO
NO
41
2. Water Leak from Dispenser
Are the gasket (seal)
and door cleaned regularly?
Is the door or gasket damaged?
Are the inlet hoses loose or cracked/split?
Replace the damaged parts.
Replace the
Inlet Hoses
.
Clean the periphery of
Gasket
and
Door
regularly.
3. Unknown – Water on Floor
YES
Is the washer horizontal ?
Adjust the height of washing machine to be kept
horizontally. (Page 7)
NO
Are the drain filter and manual
drain hose open?
YES
NO
Check!!
Turn the filter cap clockwise to close.
YES
YES
NO
42
9. DISASSEMBLY INSTRUCTIONS
Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
CONTROL PANEL
1
Unscrew 2 screws on the back of the top plate.
2
Pull the top plate backward and upward as
shown.
1
Disconnect the PWB assembly connector from
Main lead wire assembly.
2
Pull out the drawer and unscrew 2 screws.
3
Push upper hooks down on the top and pull
the control panel.
1
Disconnect the PWB assembly (Main & Display)
from control panel by unscrewing 7 screws.
PLATE ASSEMBLY (TOP)
PANEL ASSEMBLY
(CONTROL)
Hook
43
1
Disassemble the top plate assembly.
2
Pull out the drawer to arrow direction.
3
Unscrew 2 screws.
1
The hose clamps and the hose are
disassembled.
1
The ventilation bellows and the water inlet
bellows are disassembled on the tub.
DISPENSER ASSEMBLY
DISPENSER ASSEMBLY
PUSH
DRAWER
Option
Click on the first or last page to see other F071068QD2 service manuals if exist.