DOWNLOAD LG 8144 / BJ Service Manual ↓ Size: 4.05 MB | Pages: 36 in PDF or view online for FREE

Model
8144 BJ
Pages
36
Size
4.05 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
8144-bj.pdf
Date

LG 8144 / BJ Service Manual ▷ View online

■ HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
■ CONNECT POWER PLUG
8   
· Make sure that the hose is not twisted.
※ The drain hose should be placed under 100cm from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, 
It may be the cause of a fire.
· Avoid submerging the end of the hose.
TEST OPERATION
9
MAXMAX
Connect the power plug to
the outlet.
In case of Coloreds program.       
Connect the inlet hose.   
Preparation 
Press the POWER button.
Press the Start/Pause
for button.
washing.
·Check if the drum rotates                         ·Check if water is supplied
clockwise and  counterclockwise.  
through the detergent dispenser.
·Power off and then power on.
·Check if the door can be
opened after 3 minutes.
·Turn off Wash and Rinse after 
pressing the Start/Pause button
and start the machine again.
·Check drain and spin.
·Press the Rinse+Medic Rinse
button simultaneously and  the
present temperature will  be
displayed.
·If SVC is needed during 
check, remove
the remaining water by pulling 
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin 
Power off and open the 
Water removal 
door
10
5. OPERATION
• Use this button to turn the
power On/Off.
• Rotate the Cycle selector
knob to select the cycle
designed for different
types of fabric and soil
levels.
• Use this button to Start/
Stop the washer.
• By pressing the Steam Wash
button, Steam Function is
selected, light on Steam
Wash button LED 
• Allows the start of any cycle
to be delayed for 3~19
hours.
• Select a water temperature
based on the type of load you
are washing. 
• By pressing the Rinse button,
the Rinse type can be selected.
Cycle Selector
Time Delay
Power
Start/Pause
Steam Wash
Rinse, Temp. Button
11
• Use this option to prevent unwanted
use of the washer. Press and hold
Crease Care and Medic Rinse button
for 3 seconds to lock/unlock control. 
• When Child lock is set, CHILD LOCK
lights and all buttons are disabled
except the Power       button. You can
lock the washer while it is operating.
• Intensive : If the laundry is heavily soiled “Intensive” option is effective. 
By selecting the Intensive option, the wash time may be extended, depending on the
program selected.  
• Pre Wash : Use this option for load that need pretreatment. Add 16 minutes pre wash and drain.  
• Crease Care : If you want to prevent crease, select this button with spin speed. 
• Medic Rinse : For high effectiveness or more purity in rinse operation you can choose Medic
Rinse option. It can be chosen in all course with the exception of Hand Wash/Wool,
Delicate, Quick 30, Duvet, Refresh.  
Display the estimated remaining time  (Hour : Minute) 
to finish.
In case of abnormal operation, error indications are
displayed.  
(                                                                                   )
See troubleshooting guide.
• To change the spin speed, turn
the Spin knob to cycle through
available options.
Child Lock
LED display
Spin Selector knob
• Tub Clean course can be set by
pressing and holding Intensive
and Pre Wash button
simultaneously.
• Tub Clean is special cycle to
clean the inside of the washer.
Tub Clean
Option Button
Page of 36
Display

Click on the first or last page to see other 8144 / BJ service manuals if exist.