DOWNLOAD LG 8144 / BJ Service Manual ↓ Size: 4.05 MB | Pages: 36 in PDF or view online for FREE

Model
8144 BJ
Pages
36
Size
4.05 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
8144-bj.pdf
Date

LG 8144 / BJ Service Manual ▷ View online

27
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
When reconnecting the connector
INLET VALVE
3
2
4
1
VALVE 
(STEAM)
VIOLET/BLACK-BLACK
VALVE 
(PRE-WASH)
WHITE/BLACK-BLACK
VALVE 
(NORMAL-WASH) GRAY/BLACK
VALVE 
(HOT)
BLACK/WHITE
① Open the door completely.
② Remove the two screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
 CAP 
(REMAINING HOSE)
DOOR
Removing method of remained water
28
PUMP CASE
1
3
2
PANEL ASSEMBLY, CONTROL
① Unscrew the 2 screws from upper of the canbinet
cover.
② Unscrew the screw from the pump case.
① Put a flat ( - ) screwdriver or putty knife into the both
sides of the pump case, and pull it out.
① Unscrew the screw from the lower side of the cabinet
cover.
① Unscrew the 2 screws from the lower of the DECO
PANEL.
① Two screws is unscrewed.
② Push out PANEL ASSEMBLY,CONTROL after Push
the hook(
①, ②
) below.
29
① The cabinet cover clamp is removed by
special jig for service and the gasket is
released.
② Two screws are unscrewed.
Lift and separate the cabinet cover.
① The cabinet cover clamp is removed and the
gasket is released.
② Two screws are unscrewed.
③ The Door Lock S/W is disconnected form the
wiring connector and the strap.   
SWITCH ASSY, DOOR LOCK
※ NOTE: When assembling the CABINET
COVER, connect the Door S/W connector.
30
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
① Remove the hinges (Damper) at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY) 
(STATOR ASSEMBLY) 
(FRICTION DAMPER) 
HOW TO ASSEMBLE THE MOTOR
TSG (TURBO STEAM GENERATOR)
① Remove the housing coupled the TSG
(Connector, Hoses, Earth Screw)
② Taking ou the screw of the TSG.
[WD-
❋❋❋❋❋FDS]
Page of 36
Display

Click on the first or last page to see other 8144 / BJ service manuals if exist.