LG 8144 / BJ Service Manual ▷ View online
26
① The back cover is removed.
② One screw is unscrewed.
③ Pull the PWB assembly(Main) to arrow
direction
④ Two screws is unscrewed.
⑤ The cover of PWB assembly(Main) is
removed.
⑥ Disconnect connector from the wiring.
① The plate assembly(Top) are disassembled.
② Pull the drawer to arrow direction.
③ Two screws are unscrewed.
① The hose clamps and the hose are
disassembled.
② The ventilation bellows are disassembled on
the tub.
PWB ASSEMBLY(MAIN)
DISPENSER ASSEMBLY
Dispenser assembly
❋ Option
DRAWER
27
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
When reconnecting the connector
INLET VALVE
3
2
4
1
VALVE
(STEAM)
VIOLET/BLACK-BLACK
VALVE
(PRE-WASH)
WHITE/BLACK-BLACK
VALVE
(NORMAL-WASH) GRAY/BLACK
VALVE
(HOT)
BLACK/WHITE
① Open the door completely.
② Remove the two screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
the Cabinet Cover.
Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
CAP
(REMAINING HOSE)
DOOR
Removing method of remained water
28
PUMP CASE
1
3
2
PANEL ASSEMBLY, CONTROL
①
① Unscrew the 2 screws from upper of the canbinet
cover.
②
② Unscrew the screw from the pump case.
①
① Put a flat ( - ) screwdriver or putty knife into the both
sides of the pump case, and pull it out.
①
① Unscrew the screw from the lower side of the cabinet
cover.
①
① Unscrew the 2 screws from the lower of the DECO
PANEL.
①
① Two screws is unscrewed.
②
② Push out PANEL ASSEMBLY,CONTROL after Push
the hook(
①, ②
) below.
29
① The cabinet cover clamp is removed by
special jig for service and the gasket is
released.
released.
② Two screws are unscrewed.
①
Lift and separate the cabinet cover.
① The cabinet cover clamp is removed and the
gasket is released.
② Two screws are unscrewed.
③ The Door Lock S/W is disconnected form the
wiring connector and the strap.
SWITCH ASSY, DOOR LOCK
※
※ NOTE: When assembling the CABINET
COVER, connect the Door S/W connector.
Click on the first or last page to see other 8144 / BJ service manuals if exist.