LG 48842800 Service Manual ▷ View online
7
4. INSTALLATION
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120V AC, remove the transit bolts, level the washer....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
Check the setup (power supply is 120V AC, remove the transit bolts, level the washer....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
1
2
3
4
5
6
6
REMOVE THE TRANSIT
BOLTS
• Remove the transit bolts
(4 EA: ) with the supplied wrench.
•
Turn the leveling feet to adjust
the appliance horizontally.
the appliance horizontally.
•
The appliance goes up by
rotating the feet clockwise.
rotating the feet clockwise.
•
The appliance come down by
rotating the feet counterclockwise.
rotating the feet counterclockwise.
• Keep the transit bolts and
spanner for future use.
• Insert the 4 caps
(provided) into the hole.
ADJUST THE
LEVELING
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
1
8
Verify that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leaks.
HOW TO CONNECT THE INLET HOSE
CONNECT THE DRAIN HOSE
· Make sure that the hose is not twisted.
CONNECT POWER PLUG
The end of the drain hose should be placed less than 96”from the floor.
· Avoid submerging the end of the hose.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, as
doing so may cause a fire.
9
TEST OPERATION
1
Preparation for
washing.
washing.
• Connect the power plug to
the outlet.
• Connect the inlet hose.
3
Press the Start/Pause
button.
button.
•
Listen for clicking sounds to
determine if the door has
locked.
determine if the door has
locked.
6
Check the water heating
function.
function.
•
Press the WASH / RINSE button
and the present temperature will
be displayed.
and the present temperature will
be displayed.
•
Make sure that the drum rotates
clockwise and counterclockwise.
clockwise and counterclockwise.
5
Check the automatic
reversing rotation of the
drum.
reversing rotation of the
drum.
4
Check the water supply.
•
Verify that if water is supplied
through the detergent dispenser.
through the detergent dispenser.
7
Check the drain and spin
functions.
functions.
•
Press the POWER button twice
to restart.
to restart.
•
Press the SPIN SPEED button.
•
Press the START / PAUSE
button.
button.
•
Check the drain and spin
functions.
functions.
8
Press the
START / PAUSE button.
START / PAUSE button.
9
Water removal.
•
If SVC is required, remove the
remaining water in the tub, by
pulling out the drain plug.
remaining water in the tub, by
pulling out the drain plug.
2
Press the POWER button.
•
Listen for clicking sounds to
determine if the door is
unlocking.
determine if the door is
unlocking.
7
10
5. OPERATION
OPTION BUTTONS
The option buttons allow you to select additional cycle options and
will light when selected. Certain buttons also allow you to activate
special functions by pressing and holding the button for 3 seconds.
will light when selected. Certain buttons also allow you to activate
special functions by pressing and holding the button for 3 seconds.
• Prewash:
Use this option for loads that need pretreatment.
It adds 16 minutes prewash and drain.
It adds 16 minutes prewash and drain.
• Stain Cycle: Adds time to the wash and rinse cycles for better stain
removal. Automatically provides a rinse.
•` Easy Spin:
Be used when there is a vibration problem, especially on
wood floor installations.
wood floor installations.
• Extra Rinse: This option provides an additional rinse cycle.
• Delay Wash: Allows the start of any cycle to be delayed for 1~19(12, 9) hours.
• Delay Wash: Allows the start of any cycle to be delayed for 1~19(12, 9) hours.
POWER ON/OFF BUTTON
Press to turn the washer ON. Press again to turn the
washer OFF.
washer OFF.
NOTE: Pressing the ON/OFF button during a cycle will
cancel that cycle and any load settings will be lost.
cancel that cycle and any load settings will be lost.
MY CYCLE BUTTON
Press the MY CYCLE button to save and
recall a customized wash cycle for future
use.
recall a customized wash cycle for future
use.
You can save the Cycle, Wash/Rinse
Temperature, Spin Speed, and Soil
Level settings, as well as other cycle
options.
Temperature, Spin Speed, and Soil
Level settings, as well as other cycle
options.
TIME AND STATUS
The display shows the settings, estimated
time remaining, options, and status messages
for your washer.
time remaining, options, and status messages
for your washer.
5-1 CONTROL PANEL FEATURES
Click on the first or last page to see other 48842800 service manuals if exist.