LG 48842800 Service Manual ▷ View online
40
10. DISASSEMBLY INSTRUCTIONS
Disassemble and repair the pulling out power plug from the outlet.
CONTROL PANEL ASSEMBLY
TOP PLATE
1.
Remove 7 screws on the Rear Frame.
2.
Disassemble the Rear Frame.
3.
Pull the Control panel forward.
4.
Disconnect connectors.
5.
Remove 5 screws.
6.
Disassemble the controller assembly.
1.
Open the Lid.
2.
Remove 4 screws.
3.
Disassemble the Lid Assembly.
4.
Pull down the Dispenser by pushing hooks.
5.
Put a hand into the dispenser hole
and hold the top plate.
and hold the top plate.
6.
Push backward using an opener
and lift the top plate.
and lift the top plate.
¡ Do first left side (¥L).
41
DISPENSER ASSEMBLY
1.
Disassemble the 5 hose clamps.
2.
Release the 5 hoses.
NOISE FILTER
1.
Remove the screw from the top plate.
2.
Unplug the 2 connectors.
4.
Remove the 4 screws on the holder.
5.
Disassemble the 5 connectors from the valves.
3.
Remove the nut at the lower
part of the dispenser.
part of the dispenser.
¡ Wire color : ¥LWH-BK
¥MOR-BK
¥NWH-BK ¥OGY-BK
¥PBL-BK
¥PBL-BK
42
CABINET COVER
1.
Unscrew the 2 screws from upper side of the
cabinet cover.
cabinet cover.
2.
Unscrew the screw from filter cover.
3.
Put a flat (–) screwdriver into the hinge slots at
the bottom of the cover and pry it out.
the bottom of the cover and pry it out.
4.
Unscrew the 1 screws from the lower side of the
cabinet cover.
cabinet cover.
43
Clamp Assembly
5.
Open the door.
6.
Disassemble the clamp assembly using
a flat (–) screwdriver.
7.
Separate the clamp assembly from cabinet
cover.
8.
Tilt the cabinet cover.
9.
Disconnect the door switch connector.
10.
Lift and separate the cabinet cover.
11.
Disassemble the clamp assembly using
a flat (–) screwdriver.
12.
Disasemble the Gasket.
Click on the first or last page to see other 48842800 service manuals if exist.