LG 41573 Service Manual ▷ View online
4. INSTALLATION & TEST
10
Before servicing, ask the customer what the trouble is.
When installing or repairing the washer, put on long sleeve gloves and safety glasses.
Check the setup (power supply is 120V, remove the transit bolts, level the washer...)
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
• Remove the 4 shipping bolts
with the supplied wrench.
※Do first lower side to remove easily.
•
Keep the shipping bolts and
spanner for future use.
spanner for future use.
•
Insert the 4 caps (provided)
into the hole.
into the hole.
• Turn clockwise to raise;
counterclockwise to lower.
• Turn the leveling feet to adjust
the appliance.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING
BOLTS
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
ADJUST THE
LEVELING
11
• Check the rubber seals on both sides of the hose.
• Connect the water hoses to the faucets.
• Turn on the water tap to remove foreign substance
such as dirt, sand, or sawdust in the water line, and
than check the water temperature.
• Connect the hoses to the water inlets.
※ The end of the drain hose should be placed less than 96
”
cm from the floor.
· Make sure that the hose is not twisted.
· Connect the power plug to the wall outlet.
·Avoid connecting several electric devices, as
doing so may cause a fire.
· Avoid submerging the end of the hose.
HOW TO CONNECT THE INLET HOSE
CONNECT THE DRAIN HOSE
CONNECT POWER PLUG
12
TEST OPERATION
!
$
#
"
%
&
'
Preparation for
washing.
washing.
Press the POWER button.
Press the
START/PAUSE button.
START/PAUSE button.
Check the water heating
function.
function.
Check the automatic
reverse rotation.
reverse rotation.
Check the water supply.
Check the drain and spin
functions.
functions.
Press the
START/PAUSE button.
START/PAUSE button.
Water removal.
• Connect the power plug to
the outlet.
• Connect the inlet hose.
• Listen for a click to determine if
the door has locked.
• Press the WASH/RINSE button
and the present temperature will
be displayed.
be displayed.
• Check if the drum rotates
clockwise and counterclockwise.
• Check if water is supplied
through the detergent dispenser.
• If SERVICE is needed during
check, remove the remaining
water by pulling out the hose cap.
water by pulling out the hose cap.
• Listen for a click to determine
if the door is unlocking.
• Power off and the power on.
• Press the SPIN SPEED button.
• Press the START/PAUSE button.
• Check the spin and drain
• Press the SPIN SPEED button.
• Press the START/PAUSE button.
• Check the spin and drain
functions.
5. OPERATION
5-1. CONTROL PANEL FEATURES
13
796.4157#21#
Click on the first or last page to see other 41573 service manuals if exist.