LG 41573 Service Manual ▷ View online
50
DISPENSER ASSEMBLY
NOISE FILTER
Disassemble the top plate assembly.
Pull out the drawer.
Push out the DISPENSER ASSEMBLY after
unscrewing 2 screws.
Disassemble two (or three) connectors from
the NOISE FILTER.
Unscrew a screw from the TOP BRACKET.
Unscrew the Clamp nut at the lower part of the
dispenser.
Disassemble the 4 connectors from the valves.
Unscrew 2 screws from the back of the cabinet.
Wire Color
Blue Housing (YL-BK)
White Housing (BK-WH)
Blue Housing (BK-GY)
Red Housing (BK-Blue)
51
① Unscrew the 6 screws from upper of the canbinet
cover.
② Unscrew the screw from filter cover.
③ Put a flat ( -) screwdriver or putty knife into the hinge
slots at the bottom of the cover and pry it out.
④ Unscrew the screw from the lower side of the cabinet
cover.
CABINET COVER
5
2
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
Disassemble the clamp assembly.
Disassemble the gasket.
Lift and separate the cabinet cover.
આ
NOTE : When assembling the
cabinet cover, connect the door switch
connector.
5
6
7
8
9
10
11
53
① Open the door.
② Unscrew the 6 screw from the HINGE COVER.
② Unscrew the 6 screw from the HINGE COVER.
① Open the door and disassemble the CLAMP
ASSEMBLY.
② Unscrew the 2 screw.
① Disassemble the cabinet cover.
② Separate the pump hose, the bellows and
② Separate the pump hose, the bellows and
thecirculation hose assembly from the pump
assembly.
③ Disassemble the pump assembly in arrow
direction.
DOOR
DOOR LOCK SWITCH ASSEMBLY
PUMP
③ Put a flat ( -) screwdriver into the opening of the hinge,
and pull out the hinge cover.
NOTE
•
Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
DOOR SWITCH ASSEMBLY.
Click on the first or last page to see other 41573 service manuals if exist.