LG 41472 Service Manual ▷ View online
52
CABINET COVER
1
Unscrew the 6 screws from upper of the canbinet
cover.
2
Unscrew the screw from filter cover.
3
Put a flat ( -) screwdriver or putty knife into the hinge
slots at the bottom of the cover and pry it out.
4
Unscrew the screw from the lower side of the cabinet
cover.
53
!
NOTE: When assembling the CABINET
COVER, connect the door switch connector.
54
Open the door.
Unscrew the 6 screws from the HINGE COVER.
Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
.
DOOR
Open the door and disassemble the CLAMP
ASSEMBLY.
Unscrew the 2 screws.
DOOR LOCK SWITCH ASSEMBLY
NOTE
¥ Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
PUMP
Disassemble the cabinet cover.
Separate the pump hose, the bellows and the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly in arrow
direction.
CIRCULATION
HOSE
PUMP HOSE
BELLOWS
1
2
3
WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB
Disassemble the cabinet cover.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.)
by inserting a long bar in the opening.
1
2
3
55
HEATER
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
THERMISTOR
Disassemble the cabinet cover.
Unplug the white connector from the
thermistor.
Pull it out by holding the bracket of the
thermistor.
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
• Tighten the fastening nut so the heater is
secure.
1
2
3
1
2
3
(2)
(1)
Click on the first or last page to see other 41472 service manuals if exist.