LG 41373 Service Manual ▷ View online
48
10. DISASSEMBLY INSTRUCTIONS
CONTROL PANEL ASSEMBLY
1
Unscrew 2 screws on the back of the top plate.
Be sure to unplug the machine before disassembling and repairing the parts.
2
Pull the top plate backward and upward as shown.
4
Pull out the drawer and unscrew 2 screws.
5
Remove one screw.
8
Disassemble the Display PWB Assembly.
6
Lift the side the control panel assembly and
pull it out
7
Unscrew the 9 screws(M4), 1 screw(M3) from
the control panel assembly.
3
Disconnect the Display PWB assembly connector
from trans cable.
49
MAIN PWB ASSEMBLY
1
Disconnect the POWER connector and SENSOR
SWITCH ASSEMBLY.
2
Remove the Protective cover.
3
Disconnect the connectors.
4
Unscrew 1 screw on the back.
5
Remove the Main PWB.
Wire Color
Blue Housing (YL-BK)
White Housing (BK-WH)
Blue Housing (BK-GY)
Red Housing (BK-Blue)
50
DISPENSER ASSEMBLY
NOISE FILTER
1
Disassemble the top plate assembly.
2
Pull out the drawer.
1
Disassemble two (or three) connectors from
the NOISE FILTER.
2
Unscrew a screw from the TOP BRACKET.
4
Unscrew the Clamp nut at the lower part of the
dispenser.
5
Disassemble the 4 connectors from the valves.
6
Unscrew 2 screws from the back of the cabinet.
3
Push out the DISPENSER ASSEMBLY after
unscrewing 2 screws.
1
2
3
4
51
CABINET COVER
1
Unscrew the 5 screws from upper of the canbinet
cover.
2
Unscrew the screw from filter cover.
3
Put a flat ( -) screwdriver or putty knife into the hinge
slots at the bottom of the cover and pry it out.
4
Unscrew the screw from the lower side of the cabinet
cover.
Click on the first or last page to see other 41373 service manuals if exist.