LG 41025 Service Manual ▷ View online
Wire Color
Blue Housing (YL-BK)
White Housing (BK-WH)
Blue Housing (BK-GY)
Red Housing (BK-Blue)
52
DISPENSER ASSEMBLY
NOISE FILTER
1
Disassemble the top plate assembly.
2
Pull out the drawer.
1
Disassemble two (or three) connectors from
the NOISE FILTER.
2
Unscrew a screw from the TOP BRACKET.
4
Unscrew the Clamp nut at the lower part of the
dispenser.
5
Disassemble the 4 connectors from the valves.
6
Unscrew 2 screws from the back of the cabinet.
3
Push out the DISPENSER ASSEMBLY after
unscrewing 2 screws.
1
2
3
4
53
CABINET COVER
1
Unscrew the 6 screws from upper of the canbinet
cover.
2
Unscrew the screw from filter cover.
3
Put a flat ( -) screwdriver or putty knife into the hinge
slots at the bottom of the cover and pry it out.
4
Unscrew the screw from the lower side of the cabinet
cover.
54
5
Open the door.
6
Disassemble the clamp assembly.
7
Tilt the cabinet cover.
8
Disconnect the door switch connector.
9
Lift and separate the cabinet cover.
10
Disassemble the clamp assembly.
11
Disassemble the gasket.
NOTE: When assembling the CABINET
COVER, connect the door switch connector.
55
Open the door.
Unscrew the 6 screws from the HINGE COVER.
Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
.
DOOR
Open the door and disassemble the CLAMP
ASSEMBLY.
Unscrew the 2 screws.
DOOR LOCK SWITCH ASSEMBLY
NOTE
¥ Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
PUMP
Disassemble the cabinet cover.
Separate the pump hose, the bellows and the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly in arrow
direction.
CIRCULATION
HOSE
PUMP HOSE
BELLOWS
1
2
3
Click on the first or last page to see other 41025 service manuals if exist.