LG 41025 Service Manual ▷ View online
12
A
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to turn the
washer OFF.
washer OFF.
NOTE: Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be lost.
The door will unlock after a brief pause unless the
water level or temperature is too high.
cancel that cycle and any load settings will be lost.
The door will unlock after a brief pause unless the
water level or temperature is too high.
E
SPECIAL CYCLE AND OPTION BUTTONS
These buttons are used to activate special cycles or
options.
options.
G
TIME AND STATUS DISPLAY
The display shows the estimated time remaining, load
size, cycle status, and door lock status.
size, cycle status, and door lock status.
F
DETERGENT AMOUNT INDICATOR
Bars light up to indicate the best amount of HE
detergent to use based on size of dry load sensed by
washer control. Indicator will not be accurate if any wet
clothes are placed in washer.
detergent to use based on size of dry load sensed by
washer control. Indicator will not be accurate if any wet
clothes are placed in washer.
H
ADD STEAM BUTTON
Press the ADD STEAM button to add steam to the
selected cycle for added cleaning power.
selected cycle for added cleaning power.
B
CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle. Once the
desired cycle has been selected, the standard presets
will be shown in the display. These settings can be
adjusted using the cycle setting buttons anytime before
starting the cycle.
desired cycle has been selected, the standard presets
will be shown in the display. These settings can be
adjusted using the cycle setting buttons anytime before
starting the cycle.
C
START/PAUSE BUTTON
Press this button to start the selected cycle.
If the washer is running, use this button to pause the
cycle without losing the current settings.
If the washer is running, use this button to pause the
cycle without losing the current settings.
NOTE : If you do not press the START/PAUSE button
within 4 minutes of selecting a cycle, the washer
automatically turns OFF.
within 4 minutes of selecting a cycle, the washer
automatically turns OFF.
D
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the desired cycle options
for the selected cycle. The lights above the buttons
show the current selection.
for the selected cycle. The lights above the buttons
show the current selection.
NOTE : Not all settings are available on all cycle
selections.
selections.
I
A
H
F
E
G
B
C
D
I
DISPENSER
Dispenser drawer. This drawer contains the
compartments for detergent and additives.
compartments for detergent and additives.
13
5-2. CYCLE GUIDE
4219#9##
14
4102#9##
5-2. CYCLE GUIDE
15
5-3. CYCLE OPTIONS
STAIN TREAT
Use this option for heavily soiled loads that need improved stain treatment. When STAIN TREAT is selected,
the water temperature for the selected cycle will begin as warm water to help prevent the setting of certain
types of stains. Then as the cycle progresses, the water will be heated to higher temperatures to help remove
stains that require treatment at higher temperatures. This option is designed for optimum stain removal.
the water temperature for the selected cycle will begin as warm water to help prevent the setting of certain
types of stains. Then as the cycle progresses, the water will be heated to higher temperatures to help remove
stains that require treatment at higher temperatures. This option is designed for optimum stain removal.
NOTE: If STAIN TREAT is selected with the SANITIZE cycle, the cycle will begin with very hot water since that
is default for that cycle and cannot be changed.
DELAY START
Once you have selected the cycle and other settings, press this button to delay the start of the wash cycle.
Each press of the button increases the delay time by one hour, for up to 19 hours. Once the desired delay time
is set, press the START/PAUSE button to start the delay time. If the START/PAUSE button is not pressed
within 4 minutes, the control will shut off and the settings will be lost.
Each press of the button increases the delay time by one hour, for up to 19 hours. Once the desired delay time
is set, press the START/PAUSE button to start the delay time. If the START/PAUSE button is not pressed
within 4 minutes, the control will shut off and the settings will be lost.
PRE WASH
Select this option to add a 16-minute prewash and spin cycle to the chosen cycle.
This is especially useful for heavily soiled items.
This is especially useful for heavily soiled items.
AUTO SOAK
Use the AUTO SOAK option to presoak garments to help remove difficult spots or stains on fabrics.
This option provides a 30 minute presoak prior to the start of the selected cycle.
1. Add detergent only to the Main wash compartment or Liquid Box of the dispenser drawer.
2. Select desired cycle.
3. Select cycle modifiers
4. Press the START/PAUSE.
This option provides a 30 minute presoak prior to the start of the selected cycle.
1. Add detergent only to the Main wash compartment or Liquid Box of the dispenser drawer.
2. Select desired cycle.
3. Select cycle modifiers
4. Press the START/PAUSE.
ADD STEAM
ADD STEAM cycles include the Steam Refresh, Normal/Casual, Bulky/Bedding, Kids Wear, Heavy Duty
and Whitest Whites. Adding steam to these cycles provides superior cleaning performance while reducing
energy and water consumption. By using a hot steam spray from above and cooler water below, fabrics
get the cleaning benefits of a super hot wash, without the energy usage or potential damage to fabrics.
The door may become quite warm during steam cycles. This is normal. Do not attempt to override the
door lock mechanism o⁄–aaar reach into the washer during a steam cycle. Steam can cause severe burns.
Steam may not be visible during the steam cycles. This is normal. Do not use steam with delicate fabrics
such as wool, silk, or easily discolored fabrics.
and Whitest Whites. Adding steam to these cycles provides superior cleaning performance while reducing
energy and water consumption. By using a hot steam spray from above and cooler water below, fabrics
get the cleaning benefits of a super hot wash, without the energy usage or potential damage to fabrics.
The door may become quite warm during steam cycles. This is normal. Do not attempt to override the
door lock mechanism o⁄–aaar reach into the washer during a steam cycle. Steam can cause severe burns.
Steam may not be visible during the steam cycles. This is normal. Do not use steam with delicate fabrics
such as wool, silk, or easily discolored fabrics.
2
nd
RINSE
This option will add an extra rinse to the selected cycle. Use this option to help ensure the removal of
detergent or bleach residue from fabrics.
detergent or bleach residue from fabrics.
Click on the first or last page to see other 41025 service manuals if exist.