LG 41022 Service Manual ▷ View online
9
10
TEST OPERATION
1
Preparation for
washing.
washing.
• Connect the power plug to
the outlet.
• Connect the inlet hose.
3
Press the
START/PAUSE button.
START/PAUSE button.
•
Listen for a click to determine if
the door has locked.
the door has locked.
6
Check the water heating
function.
function.
•
Press the WASH/RINSE button
and the present temperature will
be displayed.
and the present temperature will
be displayed.
5
Check the automatic
reverse rotation.
reverse rotation.
4
Check the water supply.
•
Check if water is supplied
through the detergent dispenser.
through the detergent dispenser.
7
Check the drain and spin
functions.
functions.
•
Power off and the power on.
•
Press the SPIN SPEED button.
•
Press the START/PAUSE button.
•
Check the spin and drain
functions.
8
Press the
START/PAUSE button.
START/PAUSE button.
9
Water removal.
•
If SERVICE is needed during
check, remove the remaining
water by pulling out the hose cap.
2
Press the POWER button.
•
Listen for a click to determine
if the door is unlocking.
7
•
Check if the drum rotates
clockwise and counterclockwise.
clockwise and counterclockwise.
XX
\UGvwlyh{pvu
\TXUGjvu{yvs whuls mlh{|ylz
^`]U[YX`J`JJ
^`]U[XWYJ`JJ
12
A
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to turn the
washer OFF.
washer OFF.
NOTE: Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be lost.
The door will unlock after a brief pause unless the
water level or temperature is too high.
cancel that cycle and any load settings will be lost.
The door will unlock after a brief pause unless the
water level or temperature is too high.
E
SPECIAL CYCLE AND OPTION BUTTONS
These buttons are used to activate special cycles or
options.
options.
G
TIME AND STATUS DISPLAY
The display shows the estimated time remaining, load
size, cycle status, and door lock status.
size, cycle status, and door lock status.
F
DETERGENT AMOUNT INDICATOR
Bars light up to indicate the best amount of HE
detergent to use based on size of dry load sensed by
washer control. Indicator will not be accurate if any wet
clothes are placed in washer.
detergent to use based on size of dry load sensed by
washer control. Indicator will not be accurate if any wet
clothes are placed in washer.
H
ADD STEAM BUTTON
Press the ADD STEAM button to add steam to the
selected cycle for added cleaning power.
selected cycle for added cleaning power.
B
CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle. Once the
desired cycle has been selected, the standard presets
will be shown in the display. These settings can be
adjusted using the cycle setting buttons anytime before
starting the cycle.
desired cycle has been selected, the standard presets
will be shown in the display. These settings can be
adjusted using the cycle setting buttons anytime before
starting the cycle.
C
START/PAUSE BUTTON
Press this button to start the selected cycle.
If the washer is running, use this button to pause the
cycle without losing the current settings.
If the washer is running, use this button to pause the
cycle without losing the current settings.
NOTE : If you do not press the START/PAUSE button
within 4 minutes of selecting a cycle, the washer
automatically turns OFF.
within 4 minutes of selecting a cycle, the washer
automatically turns OFF.
D
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the desired cycle options
for the selected cycle. The lights above the buttons
show the current selection.
for the selected cycle. The lights above the buttons
show the current selection.
NOTE : Not all settings are available on all cycle
selections.
selections.
I
A
H
F
E
G
B
C
D
I
DISPENSER
Dispenser drawer. This drawer contains the
compartments for detergent and additives.
compartments for detergent and additives.
Click on the first or last page to see other 41022 service manuals if exist.