DOWNLOAD LG 41022 Service Manual ↓ Size: 7.42 MB | Pages: 62 in PDF or view online for FREE

Press to turn the washer ON. Press again to turn the
washer OFF.

NOTE: Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be lost. 
The door will unlock after a brief pause unless the
water level or temperature is too high.

These buttons are used to activate special cycles or
options.

The display shows the estimated time remaining, load
size, cycle status, and door lock status. 

Bars light up to indicate the best amount of HE
detergent to use based on size of dry load sensed by
washer control. Indicator will not be accurate if any wet
clothes are placed in washer. 

Press the ADD STEAM button to add steam to the
selected cycle for added cleaning power.

Turn this knob to select the desired cycle. Once the
desired cycle has been selected, the standard presets
will be shown in the display. These settings can be
adjusted using the cycle setting buttons anytime before
starting the cycle.

Press this button to start the selected cycle. 
If the washer is running, use this button to pause the
cycle without losing the current settings.

NOTE : If you do not press the START/PAUSE button
within 4 minutes of selecting a cycle, the washer
automatically turns OFF.

Use these buttons to adjust the desired cycle options
for the selected cycle. The lights above the buttons
show the current selection. 

NOTE : Not all settings are available on all cycle
selections.

Dispenser drawer.  This drawer contains the
compartments for detergent and additives. 

5-2. CYCLE GUIDE

5-2. CYCLE GUIDE

5-3. CYCLE OPTIONS

Use this option for heavily soiled loads that need improved stain treatment. When STAIN TREAT is selected, 
the water temperature for the selected cycle will begin as warm water to help prevent the setting of certain 
types of stains. Then as the cycle progresses, the water will be heated to higher temperatures to help remove 
stains that require treatment at higher temperatures. This option is designed for optimum stain removal.

NOTE: If STAIN TREAT is selected with the SANITIZE cycle, the cycle will begin with very hot water since that 

is default for that cycle and cannot be changed.

Once you have selected the cycle and other settings, press this button to delay the start of the wash cycle. 
Each press of the button increases the delay time by one hour, for up to 19 hours. Once the desired delay time 
is set, press the START/PAUSE button to start the delay time. If the START/PAUSE button is not pressed 
within 4 minutes, the control will shut off and the settings will be lost.

Select this option to add a 16-minute prewash and spin cycle to the chosen cycle. 
This is especially useful for heavily soiled items.

Use the AUTO SOAK option to presoak garments to help remove difficult spots or stains on fabrics. 
This option provides a 30 minute presoak prior to the start of the selected cycle.
1. Add detergent only to the Main wash compartment or Liquid Box of the dispenser drawer.
2. Select desired cycle.
3. Select cycle modifiers
4. Press the START/PAUSE.

ADD STEAM cycles include the Steam Refresh, Normal/Casual, Bulky/Bedding, Kids Wear, Heavy Duty 
and Whitest Whites. Adding steam to these cycles provides superior cleaning performance while reducing 
energy and water consumption. By using a hot steam spray from above and cooler water below, fabrics 
get the cleaning benefits of a super hot wash, without the energy usage or potential damage to fabrics.
The door may become quite warm during steam cycles. This is normal. Do not attempt to override the 
door lock mechanism o⁄–aaar reach into the washer during a steam cycle. Steam can cause severe burns. 
Steam may not be visible during the steam cycles. This is normal. Do not use steam with delicate fabrics 
such as wool, silk, or easily discolored fabrics.

This option will add an extra rinse to the selected cycle. Use this option to help ensure the removal of 
detergent or bleach residue from fabrics.