LG 10169388 Service Manual ▷ View online
1
SERVICE MANUAL
PEDESTAL
For washer, dryer, and combo
LG 27"
CAUTION : READ THIS MANUAL CAREFULLY TO DIAGNOSE
CORRECTLY BEFORE SERVICING THE UNIT.
MODEL : WDP4* / LWP-277*
2
PEDESTAL KIT
INTRODUCTION
The pedestal accessory includes:
• Drawer divider (1)
• Drawer divider (1)
• Wrench
• Screws (18) †
• Retainers (4)††
• Floor Pads (4)
Tools Needed for Installation:
• Phillips-head screwdriver
• Wrench (supplied)
• Phillips-head screwdriver
• Wrench (supplied)
† Dryer installation only uses 8 screws
†† For dryer only
†† For dryer only
To ensure safe and secure installation, please
thoroughly follow the instructions below.
thoroughly follow the instructions below.
• Incorrect installation can cause serious
accidents.
• The appliances are heavy. Two or more
people are required when installing the
pedestal. There is a risk of serious back injury
or other injuries.
pedestal. There is a risk of serious back injury
or other injuries.
• Do not allow children to play in or on the
drawer. There is a risk of suffocation or injury.
• Do not step on the handle. There is a risk of
serious injury.
• If appliances are already installed,
disconnect them from all power, water, or
gas lines and from draining or venting
connections. Failure to do so can result in
electrical shock, fire, explosion, or death.
gas lines and from draining or venting
connections. Failure to do so can result in
electrical shock, fire, explosion, or death.
• Wear gloves during installation.
WARNING
3
PEDESTAL KIT
PEDESTAL INSTALLATION – WASHER
1
Tighten all 4
locknuts securely
locknuts securely
2
For dryer
For washer/combo
Make sure the leveling feet of the appliance
are fully retracted.
are fully retracted.
Once the leveling feet of the washer are fully
retracted, tighten all locknuts securely.
retracted, tighten all locknuts securely.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor for
proper operation.
must be placed on a solid, sturdy, level floor for
proper operation.
Position the appliance on top of the pedestal.
The washer feet will fi t into the outermost
corner positions and the dryer feet will fi t into
the innermost positions as shown.
corner positions and the dryer feet will fi t into
the innermost positions as shown.
3
4
Make sure the back feet are in the correct
positions.
positions.
The washer feet will fi t into the outermost
corner positions and the dryer feet will fi t into
the innermost positions as shown.
corner positions and the dryer feet will fi t into
the innermost positions as shown.
Make sure the holes on the pedestal align with
the holes in the appliance, then install 4 screws
at each corner to securely attach the appliance
to the pedestal.
the holes in the appliance, then install 4 screws
at each corner to securely attach the appliance
to the pedestal.
NOTE: If the screws are not installed properly,
noise and vibration may result.
noise and vibration may result.
Move the appliance to the desired location.
4
PEDESTAL KIT
PEDESTAL INSTALLATION – DRYER
1
Then loosen
1-1/2 turns
1-1/2 turns
Retract fully
2
Retainer
T- clip
To set the dryer to the same height as the
washer, fully retract the leveling feet of the
dryer by turning them clockwise, then turn
them counterclockwise 1-1/2 turns.
washer, fully retract the leveling feet of the
dryer by turning them clockwise, then turn
them counterclockwise 1-1/2 turns.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.
must be placed on a solid, sturdy, level floor
for proper operation.
Insert the T-clip of the 4 retainers into the
dryer base as shown. Press up on the back of
the clip and pull outward to lock into place.
dryer base as shown. Press up on the back of
the clip and pull outward to lock into place.
3
4
Place the dryer on the pedestal. Make sure
the front and back feet are in the correct
positions. The dryer feet will fi t into the
innermost positions as shown.
the front and back feet are in the correct
positions. The dryer feet will fi t into the
innermost positions as shown.
Make sure the holes on the pedestal align
with the holes in the retainers, then install 2
screws at each corner to securely attach the
appliance to the pedestal.
with the holes in the retainers, then install 2
screws at each corner to securely attach the
appliance to the pedestal.
NOTE: If the screws are not installed
properly, noise and vibration may result.
properly, noise and vibration may result.
Move the appliance to the desired location.
For dryer
For washer/combo