LG V-C9156WA Service Manual ▷ View online
APPENDIX
-18-
1. THE TYPE OF POWER CORD & PARTS NUMBER
12.7
17
17
6.3
19
4.8
19
19
4
TYPE
A-1
4687FI1374J
4687FI1374H
4687FI1374E
4687FI1374L
S-1
C-1
C-2
B-3
TYPE OF PLUG
CORD REEL
ASS'Y P/No.
(L/No. : 146871)
Color identification of
fuse
fuse
Brown
13A
Yellow
5A
-19-
2. COLOR & PARTS NUMBER
COLOR
DESCRIPTION
LOCATION
NO.
DARK GREEN
SHADOW GRAY
250201
BUTTON, POWER SWITCH
5020FI3673B
5020FI3673C
250202
BUTTON, CORD REEL
5020FI3689B
5020FI3689C
250203
BUTTON, PUMP
5020FI4330B
5020FI4330C
336501
HANDLE, UPPER
3650FI1127B
3650FI1127C
336502
HANDLE, LOWER
3650FI2395B
3650FI2395C
348601
CLAMP RIGHT
4860FI3679B
4860FI3679C
348602
CLAMP LEFT
4860FI3678B
4860FI3678C
748392
TANK ASSY, DIRTY WATER
4839FI2420B
4839FI2420C
752361
INLET, DUST
5236FI2396B
5236FI2396C
COLOR
DESCRIPTION
LOCATION
NO.
LIGHT GREEN
DEEP BLUE
146611
WHEEL ASSY
4661FI3001B
4661FI3001C
235502
COVER, CONTROL
3550FI1418B
3550FI1418C
335504
COVER, TOP
3550FI1417B
3550FI1417C
748391
TANK ASSY, SHAMPOO
4839FI3700B
4839FI3700C
750061
CAP, SHAMPOO TANK
5006FI3578B
5006FI3578C
COLOR
DESCRIPTION
LOCATION
NO.
MIDDLE GRAY
130401
BASE, BODY
3040FI1410A
235501
COVER, BODY
3550FI1411A
235503
COVER, EXHAUST
3550FI2399A
235512
COVER ASSY, EXHAUST
3551FI2426A
237201
PANEL, REAL
3720FI1159A
748381
TANK, SHAMPOO
4838FI1334A
750062
CAP, TANK
5006FI3680A
-3-
SAFETY PRECAUTIONS
BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND OBSERVE EACH
POINT CAREFULLY.
POINT CAREFULLY.
1. Change the paper bag or clean the cloth bag in
case the dust bag is full.
1) If the dust bag is full, intake power will be reduced.
2) When the dust bag is full of dust, pull out the dust
bag from the inside of water tank.
2. Filter
1) The filter is composed of a clean filter, an exhaust
filter and a paper bag or a cloth bag.
2) Never use the vacuum cleaner without filters.
It may harm to the motor.
3) When the cloth bag, the clean filter and the exhaust
filter are soiled, wash the filter with neutral cleanser.
NOTE : Re-use of the cloth bag, clean filter and
exhaust filter.
• Never wash the filter in a washing machine or in a
dishwasher.
• Never use hot water for washing the filter.
• Re-use the filter after drying it completely in the
shade.
• Do not dry near fire or direct sun ray.
3. Avoid suction such materials as:
1) Inflammable liquids such as benzene, alcohol or
solvents.
2) Burning objects such as cigarette butts.
3) Bulky objects such as vinyl, paper etc.
4) Sharp objects such as needles, pins, metal or glass
particles etc.
4. Attachments
• Spray nozzle: For shampoo cleaning, water suction.
• Carpet pedal: For cleaning wooden floor, the room
floor and carpet.
• Crevice Tool: For cleaning any crevice, inside comers
of window frames.
However, do not use the crevice tool more than 20
minutes because it may cause harm to the motor.
minutes because it may cause harm to the motor.
5. Close supervision is necessary when this
vacuum cleaner is used by or near children.
Children's carelessness may cause damage to
the cleaner or injure persons.
Children's carelessness may cause damage to
the cleaner or injure persons.
6. Air exhausted from the vacuum cleaner is
normally warm. But if extraordinarily hot air is
exhausted, check if the telescopic tube, hose or
dust bag is clogged or not.
exhausted, check if the telescopic tube, hose or
dust bag is clogged or not.
7. Electric shock could occur if used outdoors or
on wet surfaces.
CAUTIONS
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT THE
ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.
ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.
1. Motor exchange
1) Separate the Body Cover and Body Base and Exhaust
Cover by unfastening the screws.
2) Disconnect the lead wires.
3) Take out Motor Cover Assy.
4) Remove the old motor and replace it with a new one.
(Note the direction of the Motor Assy and the Motor Cover
Assy).
Assy).
2. In case of exchanging other parts, refer to the
exploded view.
TROUBLE SHOOTING
-7-
1. SWITCH ON BUT MOTOR DOES NOT RUN
Checking
Cause
Solution
2. SWITCH ON, MOTOR DOES NOT RUN BUT BUZZES
Check the power
source.
source.
Poor plug insertion
Power cord cut
Interior lead wire cut
Motor(stator armature)
coil cut or damaged
coil cut or damaged
Poor contact carbon
brush defaced
brush defaced
Poor switch contact point
Insert again
Repair or exchange
Exchange the lead wire
Exchange the motor
Exchange or repair
Exchange the switch
Motor armature cut
Exchange the motor
Exchange the motor
Remove the foreign
matters
matters
Ball bearing defacement
Impeller hindrance
(Caused by foreign matters)
(Caused by foreign matters)
Click on the first or last page to see other V-C9156WA service manuals if exist.