DOWNLOAD LG V-C7142NT Service Manual ↓ Size: 1.29 MB | Pages: 36 in PDF or view online for FREE

M

K

P/No. : 3828Fi5873A

July. 2002

-3-

3828Fi5873A

1) This filter is reusable.

2) Never use the vacuum cleaner without filter.

It may damage the motor.

3) When the light of body is on, wash the motor filter

with water and brush.

4) Even if the light is not on, wash the motor filter at

least once 6 months.

Reusing of the motor filter.

Never wash the filter in a washing machine or in a
dishwasher.

Never use hot water for washing the filter.

Reuse the filter after drying it completely in the
shade for a day.

Do not dry near fire or direct sunray.

1) This filter is reusable HEPA filter.

2) For clean air, theis filter must be assembled.

3) Wash the exhaust filter with water once a year.

4) When the light of body is on, wash the exhaust filter with

water. 

Reusing of the exhaust filter.

Never wash the filter in a washing machine or in a
dishwasher.

Never use hot water for washing the filter.

Reuse the filter after drying it completely in the
shade for a half day.

Do not dry near fire or direct sunray.

Do not brush the filter. This will cause permanently
damage allowing dust to by-pass the filter.

1) Liquid or wet dust :

Clogs the ventilation holes, reduces the suction
power significantly and harms the motor.

2) Inflammable liquids such as benzene, alcohol or

solvents.

3) Burning objects such as cigarette butts.

4) Bulky objects such as vinyl, paper etc.

5) Sharp objects such as needles, pins, metal, glass

particles etc.

Nozzle : For cleaning wooden floor, the room floor

and carpet.

Crevice Tool : For cleaning any crevice, inside corners of

window frames. (However, do not use the
crevice tool more than 20 minutes.)

Dusting Brush: For delicate vacuuming of fabrics on the

furniture, curtains, etc.

Upholstery Nozzle: For vacuuming the dust on the 

upholstery.

However, do not use the crevice tool more than 20
minutes because it may cause harm to the motor.

1) Separate the Body Cover and Body Base by

unfastening the screws.

2) After disconnecting the lead wires, replace the old

motor with a new one.

Nozzle ASS’Y

UPHOLSTERY NOZZLE

ACCESSORY HOLDER

DUSTING BRUSH

CREVICE TOOL

BRUSH ASS’Y

Cord Reel
Button

Dust Tank

Flexible Hose ASS’Y

Telesscopic
Pipe ASS’Y

Switch Button
(ON/OFF)

Power Cord

3828Fi5873A

• MODEL : REFER TO THE COVER PAGE
• POWER SOURCE : ON RATING PLATE
• POWER CONSUMPTION : ON RATING PLATE
• POWER CONTROL :

- MAIN : SLIDE CONTROL (F/HOSE)

(HT)
PUSH ON/OFF(BODY)
(NT)

-SUB : VACUUM POWER ADJUSTMENT BY 

SLIDE KNOB (NT)

• CORD LENGTH : 6 m
• HOSE LENGTH : 1.6 m
• NET WEIGHT : 4.5 kg
• PACKING WEIGHT : 7.5 kg
• NET DIMENSION : 280

399

276 (W

D

H)mm

• PACKING DIMENSION : 315

565

330 (W

D

H)mm

HOSE......................................................................... 1EA
TELESCOPIC PIPE ASSY ........................................ 1EA
NOZZLE ASSY ...........................................................1EA
DUSTING BRUSH  .................................................... 1EA
CREVICE TOOL .........................................................1EA
UPHOLSTERY NOZZLE ............................................1EA
ACCESSORY HOLDER .............................................1EA
BRUSH ASS’Y ............................................................1EA

• This specifications are subject to change according to the buyer's request.

3828Fi5873A

-5-

• Almost all of the parts of this vacuum cleaner can be 

disassembled with a screw driver and each connecting
component easily fits each other. 
Disassemble one by one referring to the exploded view.

• If possible, don't disassemble except for the necessary

parts. It is not necessary to disassemble the  parts that
are not detailed in the exploded view.

1) Remove the dust tank from the set.

2) Remove the four screws fastening the body base.

3) Disassemble the body cover, raising the body cover.

1) Detach exhaust cover in the direction of the arrow and

unhook the motor covr with “

” driver.

NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power supply cord

from the wall outlet.