LG V-C6804HT Service Manual ▷ View online
SPECIFICATIONS
-6-
MODEL
POWER SOURCE
ON RATING PLATE
POWER CONSUMPTION
ON RATING PLATE
POWER CONTROL
HOSE SLIDE
PUSH ON/OFF (BODY)
CAPACITY
PAPER
4
l
CLOTH
4l
CORD LENGTH
6.3m (1.0mm
2
)
NET WEIGHT
6.1kg
PACKING WEIGHT
9.1kg
NET DIMENSION
264 x 484 x 264 (W x D x H)
PACKING DIMENSION
330 x 567 x 385 (W x D x H)
ATTACHMENTS
HOSE .......................................................................................1EA
TELESCOPIC PIPE ASS'Y .....................................................1EA
NOZZLE ASS'Y........................................................................1EA
CREVICE TOOL ......................................................................1EA
DUSTING BRUSH. ..................................................................1EA
UPHOLSTERY NOZZLE..........................................................1EA
EXTRA PAPER BAG ASS'Y ...................................................1EA
CLOTH BAG ASS'Y (OPTION)................................................1EA
V-CA504HT, V-CA504ST, V-CA584HT, V-CA504CT
V-C6803HEU, V-C6885ST, V-C6811CTP
V-C6804HT, V-CA584ST
❈ This specifications are subject to change according to the buyer's request.
-7-
DISASSEMBLY
NOTE: Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical power
supply cord from the wall outlet.
• Almost all the parts of this vacuum cleaner can be assemble with a screw driver and each connection component
easily fits each other.
Disassemble one by one referring to the exploded view.
Disassemble one by one referring to the exploded view.
• If possible, don't disassemble except for the necessary parts. It is not necessary to disassemble the parts that
are not detailed in the exploded view.
1. Open the filter cover.
Grasp carrying handle and open filter cover by lifting
latch.
latch.
2. Disassemble the body cover.
1) Remove the four screws fastening the body base.
2) Lift body cover in the direction of the arrow.
3. Motor assembly replacement.
1) Lift the cover exhaust filter and exhaust filter.
2) Remove the two screws fastening the guide
2) Remove the two screws fastening the guide
exhaust.
Filter cover
Carrying handle
Body
cover
cover
Latch
-8-
3) Remove the two screw of the motor chamber.
4) Lift the motor assembly in direction of the arrow
after stripping off the lead wires
5) Lift the motor chamber in direction of the arrow.
4. Cord reel assembly replacement.
1) Lift the cord reel assembly from the body base in
direction of the arrow.
2) Strip off the lead wires.
Cord Reel Ass’y
Motor Ass’y
-9-
Wheel
Brush Support
Base
Belt Changing and Brush Cleaning
Model: V-C6811CTP
Model: V-C6811CTP
• Disconnect cleaner from electrical outlet. Check
and remove hair, string and lint build-up frequently
in the Power Nozzle brush and brush support
areas. If build-up becomes excessive,disconnect
Power Nozzle from Telescopic wand.
in the Power Nozzle brush and brush support
areas. If build-up becomes excessive,disconnect
Power Nozzle from Telescopic wand.
TO REMOVE BELT
1) Turn Power Nozzle upside down.
2) Unscrew the six Power Nozzle cover screws.
3) Turn Power Nozzle rear side up and tilt cover
forward from back until front snaps free.
4) Carefully insert and lift screwdriver at each brush
support to free brush from base.
5) Remove worn belt.
6) Slide brush supports off to check and clean brush
support areas. See BRUSH ASSEMBLY for picture of
complete brush assembly.
Click on the first or last page to see other V-C6804HT service manuals if exist.