DOWNLOAD LG V-C6367HEU Service Manual ↓ Size: 627.29 KB | Pages: 20 in PDF or view online for FREE

Model
V-C6367HEU
Pages
20
Size
627.29 KB
Type
PDF
Document
Service Manual
Brand
Device
Vacuum Cleaner
File
v-c6367heu.zip
Date

LG V-C6367HEU Service Manual ▷ View online

1. Filter
1) The filter is composed of a motor safety filter, a exhaust
filter and a paper bag or a cloth bag.
2) Never use the vacuum cleaner without filters. 
It may harm the motor. 
3) When the cloth bag, the motor safety filter and the
exhaust filter are soiled, wash the filter with neutral
cleanser.
NOTE : Re-use of the cloth bag, motor safety filter.
Never wash the filter in a washing machine or in a
dishwasher.
Never use hot water for washing the filter.
Re-use the filter after drying it completely in the shade.
Do not dry near fire or direct sun ray.
2. Dust indicator
When the dust bag is full of dust, the indicator turns to red
(Suction power will be reduced). Then, change the paper
bag with the new one or clean the cloth bag.
4. Avoid sucking such materials as :
1) Liquid or wet dust : 
Clogs the ventilation holes, reduces the suction power
significantly and harms the motor.
2) Inflammable liquids such as benzene, alcohol or
solvents.
3) Burning objects such as cigarette butts.
4) Bulky objects such as vinyl, paper etc.
5) Sharp objects such as needles, pins, metal or glass
particles etc.
5. Attachments
• Nozzle : for cleaning wooden floor, the room floor and
carpet.
• Crevice Tool : for cleaning any crevice, inside corners of
window frames. (However, do not use the
crevice tool more than 20 minutes.)
• Dusting Brush : for delicate vacuuming of fabrics on the
furniture, curtains, etc.
• Upholstery Nozzle : for vacuuming the dust on the
upholstery.
6. Close supervision is necessary when this
vacuum cleaner is used by or near children.
Children's carelessness may cause damage to
the cleaner or injure persons.
7. Air exhausted from the vacuum cleaner is
normally warm. But if extraordinarily hot air is
exhausted, check if the telescopic tube, hose
or dust bag is clogged or not.
8. Electric shock could occur if used outdoors or
on wet surfaces.
SAFETY PRECAUTIONS
- 3 -
BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND
OBSERVE EACH POINT CAREFULLY.
1. Motor exchange
1) Separate the Body Cover and Body Base by unfastening
the screws.
2) After disconnecting the lead wires, replace the old motor
with a new one.
2. In case of exchanging other parts, refer to the
exploded view.
CAUTIONS
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT THE
ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.
TROUBLE SHOOTING
- 7 -
1. SWITCH ON BUT MOTOR DOES NOT TURN
2. SWITCH ON, MOTOR DOES NOT TURN BUT BUZZES
Checking
Cause
Solution
Check the power
source
The fuse is melt down in the
coverknife switch
Poor plug insertion
Power cord cut
Motor(stator armature) coil
cut or damaged
Poor contact carbon
brush defaced
Poor switch contact point
Motor armature cut
Ball bearing defacement
Impeller hindrance
(Caused by foreign matters)
Exchange the motor
Exchange the motor
Remove the foreign
matters
Exchange the fuse
Insert again
Repair or exchange
Interior lead wire cut
Exchange the lead wire
Exchange the motor
Exchange or repair
Exchange the switch
Normal
Abnormal
- 8 -
4. WEAK SUCTION POWER
3. SWITCH OFF BUT MOTOR TURNS
Poor connection
Poor switch
Repair
Exchange the switch
Carbon brush defaced
Motor armature cut
Exchange  the motor
Exchange the motor
Foreign matters attached to
the impeller
Remove the foreign
matters
Low voltage
Inquire to the Power utility
company
Low rotation speed
Hose and extension wands
are clogged with foreign
matters
Remove the foreign
matters in the hose or
extension wands
Motor turns normally,
but suction power is
weak
Filter bag or cloth bag is filled
with inhaled foreign matters
The slide knob on the handle
is opened
Remove the foreign
matters or exchange the
filter bag or clean the cloth
bag
Close the slide knob by
sliding it
- 9 -
5. VIBRATION NOISES
6. RADIO, TV RECEPTION DISTURBANCE
7. IMPROPER HOSE OR NOZZLE CONNECTION
Loose parts
Unbalanced motor assembly
Foreign matters are attached
to the impeller
Poor rectification of carbon brush
Armature is cut or foreign matters
attached
Secure firmly
Exchange or repair the motor
Remove the foreign matters
Exchange the motor
Exchange motor 
Remove foreign matters
Poor cord, lead wire
Poor rectification of carbon brush
Poor electric connector or
receiver
Poor capacitor
Exchange cord, lead wire
Exchange the the motor
Repair the electric connector or
receiver
Exchange the capacitor
Bent connection parts
Poor connection
(Caused by foreign matters)
Exchange the parts
Remove the foreign matters
and reconnect
Page of 20
Display

LG V-C6367HEU Service Manual ▷ Download