DOWNLOAD LG V-C6253HTV Service Manual ↓ Size: 333.25 KB | Pages: 12 in PDF or view online for FREE

Model
V-C6253HTV
Pages
12
Size
333.25 KB
Type
PDF
Document
Service Manual
Brand
Device
Vacuum Cleaner
File
v-c6253htv.zip
Date

LG V-C6253HTV Service Manual ▷ View online

1. Change the paper bag in case the indicator
moves toward red.
1) If the dust bag is full, suction power will be reduced.
2) When the dust bag is full of dust, pull out the dust bag
from the vacuum cleaner. 
2. Filter
1) The filter is composed of a motor filter, a exhaust filter
and dust bag.
2) Never use the vacuum cleaner without filters. 
It may harm to the motor. 
NOTE : Re-use of the motor filter. 
• Never wash the filter in a washing machine or in a
dishwasher.
• Never use hot water for washing the filter.
• Re-use the filter after drying it completely in the shade.
• Do not dry near fire or direct sun ray.
3. Dust indicator
Dust indicator shows you red color when the filter is full of
dust.
Then, change the bag with new one.
4. Avoid suction such materials as :
1) Liquid or wet dust : 
Clog the ventilation holes and reduces the suction power
significantly and harms the motor.
2) Inflammable liquids such as benzene, alcohol or
solvents.
3) Burning objects such as cigarette butts.
4) Bulky objects such as vinyl, paper etc.
5) Sharp objects such as needles, pins, metal or glass
particles etc.
5. Attachments
• Nozzle : for cleaning wooden floor, the room floor and
carpet.
• Crevice Tool : for cleaning any crevice, inside corners of
window frames.(However, do not use the crevice
tool more than 20 minutes.)
• Dusting Brush : for delicate vacuuming of fabrics on the
furniture, curtains, etc.
• Upholstery Nozzle : for vacuuming the dust on the
upholstery.
6. Close supervision is necessary when this
vacuum cleaner is used by or near children.
Children's carelessness may cause damage to
the cleaner or injure persons.
7. Air exhausted from the vacuum cleaner is
normally warm. But if extraordinarily hot air is
exhausted, check if the extension pipe, hose or
dust bag is clogged or not.
8. Electric shock could occur if used outdoors or
on wet surfaces.
SAFETY PRECAUTIONS
- 3 -
BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND
OBSERVE EACH POINT CAREFULLY.
1. Motor exchange
1) Separate the Body Cover and Body Base by unfastening
the screws.
2) Disconnect the lead wires.
3) Lift the old motor and replace it with a new one.
2. In case of exchanging other parts, refer to the
exploded view.
CAUTIONS
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT THE
ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.
CHECKING
CAUSE
SOLUTION
Check the power source
Poor plug insertion
Power cord cut
Interior lead wire cut
Motor(stator armature) coil 
cut or damaged
Poor contact carbon brush 
defaced
Motor armature cut
Ball bearing defacement
Impeller hindrance
(Caused by foreign matters)
Insert again
Repair or exchange
Exchange the lead wire
Exchange the motor
Exchange or repair
Poor switch contact point
Exchange the switch
Exchange the motor
Exchange the motor
Remove the foreign matters
Normal
TROUBLE SHOOTING
- 7 -
1. SWITCH ON BUT MOTOR DOES NOT TURN
2. SWITCH ON, MOTOR DOES NOT TURN BUT BUZZES
- 8 -
Carbon brush defaced
Motor armature cut
Foreign matters attached to 
the impeller
Low voltage
Exchange the carbon brush 
or the motor
Exchange the motor
Remove the foreign matters
Inquire to the power utility 
company
Low rotation speed
Poor connection
Poor switch
Repair
Exchange the switch
Filter bag or cloth bag is filled 
with inhaled foreign matters
Hose and extension wands are 
clogged with foreign matters
Remove the foreign matters 
in the hose or extension wands
The slide knob on the handle
is opened
Close the slide knob by 
sliding it
Motor turns normally, 
but suction power is weak 
Remove the foreign matters 
or exchange the filter bag or 
clean the cloth bag
3. SWITCH OFF BUT MOTOR TURNS
4. WEAK SUCTION POWER
- 9 -
5. VIBRATION NOISES
6. RADIO, TV RECEPTION DISTURBANCE
7. IMPROPER HOSE OR NOZZLE CONNECTION
Poor cord, lead wire
Poor carbon brush rectified
Poor electric connector 
or receiver
Poor capacitor
Exchange cord, lead wire
Exchange the carbon brush 
or the motor
Repair the electric connector 
or receiver
Exchange the capacitor
Bent connection parts
Poor connection
(Caused by foreign matters)
Exchange the parts
Remove the foreign matters 
and reconnect
Loose parts
Unbalanced motor assembly
Foreign matters are attached 
to the impeller
Poor carbon brush rectification
Secure firmly
Exchange or repair the motor
Remove the foreign matters
Exchange the carbon brush 
or the motor
Armature is cut or foreign 
matters attached
Exchange motor 
Remove foreign matters
Page of 12
Display

LG V-C6253HTV Service Manual ▷ Download