LG V-C4243HTU Service Manual ▷ View online
1. Change the paper bag or clean the cloth bag in
case the indicator moves toward red.
1) If the dust bag is full, intake power will be reduced.
2) When the dust bag is full of dust, pull out the dust bag
2) When the dust bag is full of dust, pull out the dust bag
from the bag mount.
2. Filter
1) The filter is composed of a clean filter, a exhaust filter
and filter bag.
2) Never use the vacuum cleaner without filters.
It may harm to the motor.
NOTE : Re-use of the clean filter and exhaust filter.
• Never wash the filter in a washing machine or in a
• Never wash the filter in a washing machine or in a
dishwasher.
• Never use hot water for washing the filter.
• Re-use the filter after drying it completely in the shade.
• Do not dry near fire or direct sun ray.
• Re-use the filter after drying it completely in the shade.
• Do not dry near fire or direct sun ray.
3. Dust indicator
Dust indicator shows you red color when the filter is full of
dust.
Then, change the bag with new one.
dust.
Then, change the bag with new one.
4. Avoid suction such materials as :
1) Liquid or wet dust :
Clog the ventilation holes and reduces the intake power
significantly and harms the motor.
significantly and harms the motor.
2) Inflammable liquids such as benzene, alcohol or
solvents.
3) Burning objects such as cigarette butts.
4) Bulky objects such as vinyl, paper etc.
5) Sharp objects such as needles, pins, metal or glass
4) Bulky objects such as vinyl, paper etc.
5) Sharp objects such as needles, pins, metal or glass
particles etc.
5. Attachments
• Nozzle : for cleaning wooden floor, the room floor and
carpet.
• Crevice Tool : for cleaning any crevice, inside corners of
window frames.(However, do not use the crevice
tool more than 20 minutes.)
tool more than 20 minutes.)
• Dusting Brush : for delicate vacuuming of fabrics on the
furniture, curtains, etc.
• Upholstery Nozzle : for vacuuming the dust on the
upholstery.
6. Close supervision is necessary when this
vacuum cleaner is used by or near children.
Children's carelessness may cause damage to
the cleaner or injure persons.
Children's carelessness may cause damage to
the cleaner or injure persons.
7. Air exhausted from the vacuum cleaner is
normally warm. But if extraordinarily hot air is
exhausted, check if the extension pipe, hose or
dust bag is clogged or not.
exhausted, check if the extension pipe, hose or
dust bag is clogged or not.
8. Electric shock could occur if used outdoors or
on wet surfaces.
SAFETY PRECAUTIONS
- 3 -
BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY, AND
OBSERVE EACH POINT CAREFULLY.
OBSERVE EACH POINT CAREFULLY.
1. Motor exchange
1) Separate the Body Cover and Body Base by unfastening
the screws.
2) Disconnect the lead wires.
3) Lift the old motor and replace it with a new one.
3) Lift the old motor and replace it with a new one.
2. In case of exchanging other parts, refer to the
exploded view.
CAUTIONS
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT THE
ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.
ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.
CHECKING
CAUSE
SOLUTION
Check the power source
Poor plug insertion
Power cord cut
Interior lead wire cut
Motor(stator armature) coil
cut or damaged
cut or damaged
Poor contact carbon brush
defaced
defaced
Motor armature cut
Ball bearing defacement
Impeller hindrance
(Caused by foreign matters)
(Caused by foreign matters)
Insert again
Repair or exchange
Exchange the lead wire
Exchange the motor
Exchange or repair
Poor switch contact point
Exchange the switch
Exchange the motor
Exchange the motor
Remove the foreign matters
Normal
TROUBLE SHOOTING
- 7 -
1. SWITCH ON BUT MOTOR DOES NOT TURN
2. SWITCH ON, MOTOR DOES NOT TURN BUT BUZZES
- 8 -
Carbon brush defaced
Motor armature cut
Foreign matters attached to
the impeller
the impeller
Low voltage
Exchange the carbon brush
or the motor
or the motor
Exchange the motor
Remove the foreign matters
Inquire to the power utility
company
company
Low rotation speed
Poor connection
Poor switch
Repair
Exchange the switch
Filter bag or cloth bag is filled
with inhaled foreign matters
with inhaled foreign matters
Hose and extension wands are
clogged with foreign matters
clogged with foreign matters
Remove the foreign matters
in the hose or extension wands
in the hose or extension wands
The slide knob on the handle
is opened
is opened
Close the slide knob by
sliding it
sliding it
Motor turns normally,
but suction power is weak
but suction power is weak
Remove the foreign matters
or exchange the filter bag or
clean the cloth bag
or exchange the filter bag or
clean the cloth bag
3. SWITCH OFF BUT MOTOR TURNS
4. WEAK SUCTION POWER
- 9 -
5. VIBRATION NOISES
6. RADIO, TV RECEPTION DISTURBANCE
7. IMPROPER HOSE OR NOZZLE CONNECTION
Poor cord, lead wire
Poor carbon brush rectified
Poor electric connector
or receiver
or receiver
Poor capacitor
Exchange cord, lead wire
Exchange the carbon brush
or the motor
or the motor
Repair the electric connector
or receiver
or receiver
Exchange the capacitor
Bent connection parts
Poor connection
(Caused by foreign matters)
(Caused by foreign matters)
Exchange the parts
Remove the foreign matters
and reconnect
and reconnect
Loose parts
Unbalanced motor assembly
Foreign matters are attached
to the impeller
to the impeller
Poor carbon brush rectification
Secure firmly
Exchange or repair the motor
Remove the foreign matters
Exchange the carbon brush
or the motor
or the motor
Armature is cut or foreign
matters attached
matters attached
Exchange motor
Remove foreign matters
Remove foreign matters