LG 60PT200C-WA / 60PT200N (CHASSIS:PC11A) Service Manual ▷ View online
2-2. Installation_Dip switch setting
1.
Open the cover at the marked position on the back of each monitor.
2.
Start setting up from #0 switch as shown in the figure below.
■
To control each monitor separately, set up monitor ID using the dip switch. The far left monitor becomes #1 when yo
u stand in front of the monitors. Number the monitors in sequence from the far left to right.
2-3. Installation_Module ROM-Download
■
If you want to use the e-MultiBoard pen touch function with different monitors, you will need to download a
separate plasma module ROM file for each monitor. Use the stand-alone ROM writer provided to download the file.
2-3. Installation_Module ROM-Download
■
There are eight files to download as shown in the
figure below.
You will need to download the files in the specified
order for each monitor.
You will need to download the files in the specified
order for each monitor.
■
In the file names, L represents Landscape; P
represents Pivot.
■
File name :
[CPU Update]60C2_XXX_L#1
[CPU Update]60C2_XXX_L#2
[CPU Update]60C2_XXX_L#3
[CPU Update]60C2_XXX_P#1
[CPU Update]60C2_XXX_P#2
[CPU Update]60C2_XXX_P#3
[CPU Update]60C2_XXX_P#4
[CPU Update]60C2_XXX_P#5
[CPU Update]60C2_XXX_L#2
[CPU Update]60C2_XXX_L#3
[CPU Update]60C2_XXX_P#1
[CPU Update]60C2_XXX_P#2
[CPU Update]60C2_XXX_P#3
[CPU Update]60C2_XXX_P#4
[CPU Update]60C2_XXX_P#5
1. Please enter the Launch Matrox
PowerDesk after click the right mouse
button on the wallpaper of your PC
PowerDesk after click the right mouse
button on the wallpaper of your PC
2. Please enter the Multi Display Setup
3. Please enter the Use Streched mode
after click the right mouse button on the A1
Next Select the 5by1 layout. If you want
3by1, you select 3by1 layout
after click the right mouse button on the A1
Next Select the 5by1 layout. If you want
3by1, you select 3by1 layout
4. It was completed in landscape 5by1
If you want landscape mode, you are
finished here.
If you want landscape mode, you are
finished here.
5. You cand select the angle(90,180,270)
6. If you select 90 degree counterclockwise, Pivot
is completed.
is completed.
2-4. Installation_Graphic card(matrox) Example : 5by1 Pivot
※ Note : The Matrox graphics card driver has two kinds of files : XDDM files and WDDM files. Please install the WDDM file.
Click on the first or last page to see other 60PT200C-WA / 60PT200N (CHASSIS:PC11A) service manuals if exist.