LG 60PF95-ZA (CHASSIS:PD75A) Service Manual ▷ View online
- 4 -
SPECIFICATIONS
NOTE : Specifications and others are subject to change without notice for improvement.
V
Application Range
This spec is applied to the 60”
PLASMA TV used PD75A Chassis.
V
Specification
Each part is tested as below without special appointment.
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
V
Test Method
1) Performance : LGE TV test method followed.
2) Demanded other specification
2) Demanded other specification
Safety : CE, IEC specification
EMC
EMC
: CE, IEC
V
General Specification ( 60” FHD Module)
Display Screen Device
Aspect Ratio
PDP Module
Operating Environment
Storage Environment
Input Voltage
1
2
3
4
5
6
No
Item
Specification
Remark
60” Wide Color Display Module
16:9
PDP60H1,
RGB Closed Type, Glass Filter
1)Temp.
: 0~60deg
2)Humidity : 20~80%
3)Temp.
: -10~60deg
4)Humidity : 10~90%
100-240V~, 50/60Hz
Plasma Display Panel
LGE SPEC.
Maker : LG
Chassis
PD75A
60PF95
UK, German, Italy, France, Sweden, Finland, Spain,
Netherlands, Belgium, Luxemburg, Greece, Denmark,
Czech, Austria, Poland, Portugal, Norway, Rumania,
Hungary , Bulgaria, Croatia, Serbia, Swiss, Slovenia, Russia
LG
Model Name
Market
Brand
Remark
60PF95
Safety : IEC/EN60065
EMI : EN55013
EMS : EN55020
UK, German, Italy, France, Sweden, Finland,
Spain, Netherlands, Belgium, Luxemburg,
Greece, Denmark, Czech, Austria, Poland,
Portugal, Norway, Rumania, Hungary , Bulgaria,
Croatia, Serbia, Swiss, Slovenia, Russia
Model
Appliance
Market
TEST
Remark
- 5 -
V
Module Specification
V
General Specification ( PDP60) - PDP Module
Market
Broadcasting system
Receiving system
Scart Jack (2EA)
Video Input (1EA)
S-Video Input (1EA)
Component Input (1EA)
RGB Input(1EA)
HDMI Input(2EA)
Audio Input (3EA)
1
2
3
4
5
6
7
8
9
10
No
Item
Specification
Remark
UK, German, Italy, France, Sweden, Finland, Spain,
Netherlands, Belgium, Luxemburg, Greece,
Denmark, Czech, Austria
Poland, Portugal, Norway, Rumania, Hungary ,
Bulgaria, Croatia, Serbia, Swiss, Slovenia, Russia
1) PAL-BG/I / I’/ DK
2) SECAM-L/L’
3) DVB-T
Analog : Upper Heterodyne
Digital : COFDM
PAL, SECAM
PAL, SECAM, NTSC
PAL, SECAM, NTSC
Y/Cb/Cr, Y/Pb/Pr
RGB-PC
HDMI-DTV & SOUND
PC Audio, Component, AV
Analog Only
Scart 2 Jack : MNT / DTV output
4 System : PAL, SECAM, NTSC, PAL60
4 System : PAL, SECAM, NTSC, PAL60
L/R Input
Display area
Outline dimension
Number of Pixels
Cell pitch
Pixel type
Weight(net)
Weight(gross)
Operation Environment
Temperature
Humidity
Pressure
Storage Environment
Temperature
Humidity
Pressure
Image stick minimization
Start time
mode
Low Brightness
Arrival Time
1324.8 (H) * 745.2(V) °æ0.5
1408 (W) x 828 (H) x 70 (D) °æ1
1920 (H) x 1080(V)
230um (H) x 690um (V)
RGB closed type
32
33
34
119
120
121
0 ~ 60
20 ~ 80
800 ~ 1100
-10 ~ 60
10 ~ 90
700 ~ 1100
4.5
5 5.5
14
15
16
1
2
3
4
5
6
7
8
9
10
No
Item
Remark
1Pixel=3RGB Cells
Net 1EA
12EA 1Box
Altitude : 0 to 2000M
Altitude : 0 to 3000M
mm
mm
um
Kg
Kg
deg
%
hPa
deg
%
hPa
min
min
Min Typ Max Unit
- 6 -
V
FHD Module ( Glass Filter, 60Hz- This data at 50Hz is about 80% level of 60Hz data )
White peak brightness
White average brightness
Brightness uniformity
Color Coordinate
White
X
Y
Color coordinate uniformity
Contrast ratio at dark room
60Hz
Color Temperature
Cool
Medium
Warm
Color pull in Range
PAL
NTSC
Color killer Sensitivity
300
45
-15
0.261
0.268
-0.02
2500 :1
10000
8300
5500
-500
-500
-80
380
55
0
0.276
0.283
Average
3000 :1
11000
9300
6500
-
-
+15
0.291
0.298
+0.02
12000
10300
7500
+500
+500
1
2
3
4
5
6
7
8
9
No
Item
Remark
(*) Peak Brightness Mode
- 1/100 white window pattern
(Typically 1% window size)
- 100 IRE (255 Gray)
- Picture : Dynamic (cool)
- Input : HDMI-PC (1920x1080 60Hz)
* Peak Brightness Condition may
Slightly different between Sets.
- Full White Pattern
- 100 IRE (255 Gray)
- Picture : Dynamic (cool)
- Full White Pattern
- 85 IRE (216 Gray)
- Picture : Dynamic (cool)
- Full White Pattern
- 85 IRE (216 Gray)
- Picture : Dynamic (cool)
- 85IRE Full White Pattern
- Picture : Dynamic (cool)
- 1/100 white window pattern
- 100 IRE (255 Gray)
- Picture : Dynamic (cool)
- Input : HDMI-PC (1920x1080 60Hz)
- Full White Pattern
- 85 IRE (216 Gray)
- Picture : Dynamic (cool)
cd/m2
cd/m2
%
Hz
Hz
dBm
Min Typ Max Unit
- 7 -
ADJUSTMENT INSTRUCTION
1. Application Object
These instructions are applied all of the 60” PLASMA TV,
PD75A
PD75A
Chassis.
2. Note
(1) Because this is not a hot chassis, it is not necessary to use
an isolation transformer. However, the use of isolation
transformer will help protect test instrument.
transformer will help protect test instrument.
(2) Adjustment must be done in the correct order.
(3) The adjustment must be performed in the circumstance of
(3) The adjustment must be performed in the circumstance of
25±5°C of temperature and 65±10% of relative humidity if
there is no specific designation.
there is no specific designation.
(4) The input voltage of the receiver must keep 100-240V~,
50/60Hz.
(5) Before adjustment, execute Heat Run for 15 minutes.
O
After RGB Full white HEAT-RUN Mode, the receiver must
be operated prior to adjustment.
O
Enter into HEAT-RUN MODE
1) Press the POWER ON KEY on R/C for adjustment.
2) OSD display and screen display PATTERN MODE.
2) OSD display and screen display PATTERN MODE.
* Set is activated HEAT-RUN without signal generator in
this mode.
* Single color pattern(RED/BLUE/GREEN) of HEAT-RUN
mode uses to check PANEL.
3. Adjustment items
3-1. PCB assembly adjustment items
(1) Channel memory.
- Recovery the channel memory by adjust R/C.
3-2. SET assembly adjustment items
(1) Adjustment of POWER PCB assembly voltage.
(2) DDC Data input.
(3) Auto AV(CVBS) Color Balance.
(4) Auto Component Color Balance adjust.
(2) DDC Data input.
(3) Auto AV(CVBS) Color Balance.
(4) Auto Component Color Balance adjust.
- standard equipment : 802F Pattern Generator. Master
Pattern Generator(MSPG-925, etc) or same product.
(5) Auto RGB Color Balance adjustment
- standard equipment : PC Pattern Generator(VG828,
VG854, 801GF, MSP3240A) or same product.
(6) Factoring Option Data input.
4. Channel memory Setting Method
: You can set channel memory by R/C for adjustment.
1) Press ADJ key on R/C for adjustment.
2) Press ENTER key on “System Control3”.
3) Press VOL + key on “Channel Recover”.
2) Press ENTER key on “System Control3”.
3) Press VOL + key on “Channel Recover”.
5. PCMCIA CARD Checking Method
: You must adjust DTV 29 Channel and insert PCMCIA CARD
to socket.
1) If PCMCIA CARD works normally, normal signals display
on screen. But it works abnormally, “No CA module” words
display on screen.
display on screen.
6. POWER PCB Assy Voltage
Adjustments
(Va, Vs Voltage adjustments)
6-1. Test Equipment :
D.M.M. 1EA
6-2.Connection Diagram for Measuring
: refer to Fig.1
6-3. Adjustment Method
(1) Va Adjustment
1) After receiving 100% Full White Pattern, HEAT RUN.
2) Connect + terminal of D.M.M to Va pin of P805, connect
2) Connect + terminal of D.M.M to Va pin of P805, connect
- terminal to GND pin of P805.
3) After turning RV501, voltage of D.M.M adjustment as
same as Va voltage which on label of panel right/top.
(Deviation; ±0.5V)
(Deviation; ±0.5V)
(2) Vs Adjustment
1) Connect + terminal of D.M.M to Vs pin of P805, connect
– terminal to GND pin of P805.
2) After turning RV401, voltage of D.M.M adjustment as
same as Va voltage which on label of panel right/top.
(Deviation; ±0.5V)
(Deviation; ±0.5V)
If you turn on a still screen more than 20 minutes (Especially
Digital pattern, Cross Hatch Pattern), an afterimage may occur
in the black level part of the screen.
Digital pattern, Cross Hatch Pattern), an afterimage may occur
in the black level part of the screen.
Each PCB assembly must be checked by check JIG set.
(Because power PCB Assembly damages to PDP Module,
especially be careful)
(Because power PCB Assembly damages to PDP Module,
especially be careful)
(Fig.1) Connection diagram of power adjustment for measuring