DOWNLOAD LG 50PX1D-UC (CHASSIS:AF-05FC) Service Manual ↓ Size: 18.13 MB | Pages: 32 in PDF or view online for FREE

- 10 -

(4) Click the "OpenFile - Download" button from CP Data

Download, ‘select Private Key’ appears and click ENTER.  

(5) After clicking ENTER, the ‘opens Private key' window

appears and select the Private key applied to the SET.
The Private Key file name is on the Label of the Digital
Board.

(6) When the Dialog window appears, click OK and the write

work will begin.

(7) When completed, click ‘CP Data Download: OK’ 

[

When ‘CP Data Download: OK’ does not appear, certificate

has not Download correctly.
SET is rebooted and certificate Download work must be
repeated.  

(1) Confirm that the Cable Card is inserted in the slot.
(2) Enter the EZ adjust menu by pressing Adjust on the

Service Remote Control (S R/C).

(3) Go to number 2 Cable Check and press the Right key (

G

) .

(4) Confirm items below.

Name

Descrambler

Check

CableCARD

OOB Path

FDC_SNR

Video Signal

Normal

OK

CableCARD

TM

is inserted.

OK(Lock)

OK(20dB above)

Normal Screen

Defective

Not OK

CableCARD

TM

is removed.

Not OK(Unlock)

Not OK(20dB under)

Black Screen

(No Picture)

- 11 -

(Va, Vs Voltage Adjustment)

D.M.M 1EA

Refer to Fig 1.

1) Connect + terminal of D.M.M to Va pin of P805 and

connect – terminal  to GND pin of P805.

2) Adjust RV601 voltage to match that of the label on the

Top/Right of the panel. (Deviation : ±0.5V)

1) Connect + terminal of D.M.M to Vs pin of P805 and

connect – terminal to GND pin of P805.

2) Adjust RV401 voltage to match that of the label on the

Top/Right of the panel. (Deviation : ±0.5V) 

7. EDID(The Extended Display 

This is the function that enables “Plug and Play".

1) Jig for adjusting PC, DDC. (PC serial to D-sub.

Connection equipment)

2) S/W for writing DDC(EDID data write & read)
3) D-Sub cable
4) Jig for HDMI Cable connection

1) Set devices as below and turn on the PC and JIG.
2) Open S/W for writing DDC (EDID data write & read).

(operated in DOS mode)

:

EDID for HDMI 1 (DDC (Display Data Channel) Data)
EDID table =

0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F

__________________________________________________ 

00 |    00  FF  FF  FF  FF  FF  FF  00 1E  6D  01  00  01  01  01  01

10 |    00  0F  01  03  80  73  41  96  0A  CF  74  A3  57  4C B0  23

20 |    09  48  4C  2F  CE  00  31  40  45  40  61  40  01  01  01  01

30 |    01  01  01  01  01  01  01  1D  00  72  51  D0  1E  20  6E  28

40 |    55  00  C4  8E  21  00  00  1E  01  1D  80  18  71  1C  16  20

50 |    58  2C  25  00  C4  8E  21  00  00  9E  00  00  00  FC  00 4C

60 |    47  2D  54  56  0A  20  20  20  20  20  20  20  00  00  00  FD

70 |    00  3B  3C  1F  2D  08  00  0A  20  20  20  20  20  20  01  77

80 |    02  03  15  F2  46  84  85  03  02  07  06  23  15  07  50  65

90 |    03  0C  00  10  00  8C  0A  D0  8A  20  E0  2D  10  10 3E  96

A0 |    00  C4  8E  21  00  00  18  8C  0A  D0  8A  20  E0  2D  10 10

B0 |    3E  96  00  13  8E  21  00  00  18  8C  0A  A0  14  51  F0 16

C0 |    00  26  7C  43  00  C4  8E  21  00  00  98  8C  0A  A0  14 51

D0 |    F0  16  00  26  7C  43  00  13  8E  21  00  00  98  00  00  00

E0 |    00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00

F0 |    00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  88

Each PCB Assy must be checked by Check JIG Set before
assembly. (Especially, be careful Power PCB Assy which can
cause Damage to the PDP Module.)

<Fig. 1>  Connection Diagram of Power Adjustment for the

Measuring (Power Board)

PDP TV SET

(or Digital Board)

<Fig. 2>

- 12 -

:

EDID DATA for RGB
EDID table =

00  01  02  03  04  05  06  07  08  09  0A  0B  0C  0D  0E  0F

__________________________________________________

00 | 00  FF  FF  FF  FF  FF  FF  00  1E  6D  01  01  01  01  01  01  

10 | 06  0D  01  03  18  5C  34  96  08  CF  72  A3  57  4C  B0  23  

20 | 09  45  5D  EF  CE  00  31  D9  31  59  45  59  01  01  01  01  

30 | 01  01  01  01  01  40  C3  1E  00  20  41  00  20  30  10  60  

40 | 13  00  98  08  32  00  00  18  00  00  00  FC  00  4C  47  20  

50 | 54  56  0A  20  20  20  20  20  20  20  00  00  00  FD  00  30  

60 | 4C  1E  64  0F  00  0A  20  20  20  20  20  20  00  00  00  00  

70 | 00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  C5

AD9883A-Set adjustment to set the black level and the Gain
of optimum with an automatic movement from the analog =>
digital converter.

Service R/C, 801GF(802B, 802F, 802R) or MSPG925FA
Pattern Generator
(720P  The Horizontal 100% Color Bar Pattern output will be
possible and the output level will accurately have to be
adjusted to 0.7±0.1Vp-p)

(1) Select Component1 or Component2 as the input with

100% Horizontal Color Bar Pattern(HozTV31Bar) in 720p
Mode and select ‘Normal’ on screen.  

(2) After receiving signal for at least 1 second, press the ADJ

Key on the Service R/C to enter the ‘Ez - Adjust’ and select
the ‘3. AD9883A-Set’.
Pressing the Enter Key to adjust with automatic movement.  

(3) When the adjustment is over, 'AD9883A Component

Success’ is displayed. If the adjustment has errors,
'AD9883A Configuration Error’ is displayed.

(4) After the Component AD9883A adjustment is over, convert

the RGB-DTV Mode and display Pattern. 
When the adjustment is over, 'AD9883A RGB_DTV
Success’ is displayed. If the adjustment has errors,
'AD9883A Configuration Error’ is displayed.

(5) Readjust after confirming the case Pattern or adjustment

condition where the adjustment had errors. 

(6) After adjustment is complete, exit the adjustment mode by

pressing the ADJ KEY.

(1) Color analyzer (CA-100 or similar product)
(2) Automatic adjustor (with automatic adjustment hour

necessity and the RS-232C communication being possible)

(3)  Pattern Generator(MSPG-925FA): DVI Output

(Automatic Adjustment)

[

[

(Automatic Adjustment)

<Fig. 3>  Adjustment Pattern : 720P/60Hz HozTV31Bar Pattern

Full White Pattern

Digital RGB

PDP MONITOR

COLOR

ANALYZER

TYPE; CA-100

MSPG-925FA

<Fig. 4>  Connection Diagram of Automatic Adjustment

R Gain

G Gain

B Gain

R Cut

G Cut

B Cut

jg

jh

ji

Cool

ja

jb

jc

Med

RS-232C COMMAND

CENTER(DEFAULT)

jd

je

jf

00

00

00

ff

ff

ff

Warm

Min

Max

C0

91

4C

40

40

40

Cool

C0

B3

95

40

40

40

Med

C0

BD

B7

40

40

40

Warm

- 13 -

O

Operate the Zero-calibration of the CA-100, then attach

sensor to PDP module surface when you adjust.

O

Manual adjustment is also possible by the following sequence.  

(1) Enter ‘Ez - Adjust’ by pressing ADJ KEY on the Service

Remote Control.

(2) Select "7. WHITE PATTERN" using CH +/- Key and HEAT

RUN at least 30 minutes by pressing the ENTER Key.

(3) Receive the Window pattern signal from Digital Pattern

Generator. (AV Input: connect the ‘HDMI’)

(4) After attaching sensor to center of screen, select ‘5. White-

Balance’ of ‘Ez - Adjust’ by pressing the ADJ KEY on the
Service R/C. Then enter adjustment mode by pressing the
Right KEY (

G

) .

(5) Adjust the Hight Light using G Gain/B Gain(Cool: 42”).

Adjust the Hight Light using R Gain/G Gain(Cool: 50”).
Adjust the Hight Light using G Gain/B Gain(Medium).
Adjust the Hight Light using G Gain/B Gain(Warm).

(6) Adjust using Volume +/- KEY.

After adjustment is complete, exit the adjustment mode by
pressing the ADJ KEY.

High Level: 216gray

[Cool]
X; 0.278±0.002   Y; 0.279±0.002
Color temperature: 11000°K±1000°K

[Medium]
X; 0.287±0.002   Y; 0.289±0.002
Color temperature: 9300°K±1000°K

[Warm]
X; 0.315±0.002   Y; 0.316±0.002
Color temperature: 6500°K±1000°K

(1) Service R/C
(2) MSPG925FA Pattern Generator

(100% Color Bar Pattern output will be possible and the
output level will accurately have to be adjusted to
0.7±0.1Vp-p: Model #201(NTSC-M), Patter #32))

(1) After receive signal to Ant input, CVBS output of

MSPG925FA to Video and confirm the signal receiving.

(2) Enter the ‘EZ-ADJUST’ by pressing the ADJ Key on the

Service R/C.

(3) Select ‘3. Video(uPD)-Set’ and enter the adjustment mode

by pressing the right key(

G

).

(4) When enter the adjustment mode, displayed the TV 2CH

Screen automatic at picture and appear as below figure.

(5) When the automatic adjustment is over, 'RF Configuration

Success’ is displayed. If the adjustment has errors, 'Video
Configuration Error’ is displayed.

(6) After the RF signal automatic adjustment is over, convert

the Video Mode as below figure and adjust with automatic
movement the Video Mode. 
When the automatic adjustment is over, 'Video
Configuration Success’ is displayed. If the adjustment has
errors, 'Video Configuration Error’ is displayed.