DOWNLOAD LG 50PX1D-UC (CHASSIS:AF-05FC) Service Manual ↓ Size: 18.13 MB | Pages: 32 in PDF or view online for FREE

- 6 -

- When using the remote control, aim it at the remote control sensor on the TV.

MODE

DAY -

DAY +

FLASHBK

TIMER

FREEZE

TV INPUT

TV/VIDEO

EXIT

GUIDE

CC

APM

• Rotates the input mode between Antenna

and Cable. 

• Video, Front Video, Component 1-2, RGB-

DTV (or RGB-PC) and HDMI/DVI  input

sources, screen returns to the last TV.

Switches the sound on or off.

Selects the remote operating mode: TV,

DVD, VCR, AUDIO, CABLE or STB. Select

a mode other than TV, for the remote to

operate an external device.

FLASHBK
Tunes to the recent channels.

Clears all on-screen displays and returns to

TV viewing from any menu.

Lets you select the amount of time before

your TV turns itself off automatically.

Brings up the main menu to the screen.

Selects a factory preset picture mode

depending on the viewing environment.

FREEZE
Freezes the currently-viewed picture.
Main picture is frozen.

TV/VIDEO
External input modes rotate in regular
sequence: Antenna, Cable, Video, Front
Video, Component 1-2, RGB-DTV (or
RGB-PC) and  HDMI/DVI input sources.
(Video, Front Video, Component 1-2 input
sources are linked automatically, only if
these are connected )

RATIO
Changes the aspect ratio.

INFO
When you watch the TV, information dis-
plays  on top of the screen. Not available
in Component 1-2, RGB and HDMI/DVI
mode. 

FAV
Scrolls the Favorite channels.

- 7 -

DAY+/DAY-
Moves the Listings Grid forward or back-
ward in 24 hour increments.

MODE

DAY -

DAY +

FLASHBK

TIMER

FREEZE

TV INPUT

TV/VIDEO

EXIT

GUIDE

 

CC

APM

VCR/DVD BUTTONS
• Control some video cassette recorders
or DVD players. ("RECORD" button is not
available for DVD players.)

Turns your TV or any other programmed

equipment on or off, depending on mode.

Select a closed caption:

Off, CC1~4, Text1~4.

Allows you to navigate the on-screen menus

and  adjust the system settings to your pref-

erence.

CHANNEL UP/DOWN
Selects available channels found with EZ
scan.
PAGE UP/PAGE DOWN
Moves from one full set of screen infor-
mation to the next one.

Selects the sound appropriate for the pro-

gram's character.

SAP
Selects MTS sound: Mono, Stereo, and
SAP in Analog mode. Change the audio
language in DTV mode.

Illuminates the remote control

buttons of selected mode.

Increases/decreases the sound level.

Shows program schedule.

Adjusts screen position, size, and phase in

PC mode.

APM(Adaptive Picture Mode)
Concurrently, compare  with the
Daylight, Normal, Night Time.and
Custom on the screen.

- 8 -

• The specifications shown above may be changed without prior notice for quality improvement.

AC100-240V ~ 50/60Hz

NTSC-M, ATSC, 64 & 256 QAM

VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135, DTV 2 ~ 69

75 

Ω

16,770,000 (256 steps of each R, G and B)

32 ~ 104°F (0 ~ 40°C)

Less than 80%

6561 feet (2000m)

55 / 1400

32.3 / 821

12.4 / 315

114.8 / 52.05

1366 x 768  (Dot) 

Width (inches / mm)

Height (inches / mm)

Depth (inches / mm)

Weight (pounds / kg)

Resolution

Power requirement

Television System

Program Coverage

External Antenna Impedance

Color

Operating Temperature Range

Operating Humidity Range

Maximum Elevation

These instructions are applied to all of the PDP TV, AF-05FC.

(1) Because this is not a hot chassis, it is not necessary to use

an isolation transformer. However, the use of isolation
transformer will help protect test equipment.

(2) Adjustments must be done in the correct order.
(3) The adjustments must be performed in the conditions of

25±5°C of temperature and 65±10% of relative humidity if
there is no specific designation.

(4) The input voltage of the receiver be must kept 110V, 60Hz

during adjustment.

(5) The receiver must be operational for about 15 minutes

prior to the adjustments.  

1) After receiving 100% white pattern, the receiver must be

operated 15 minutes prior to adjustment. (Or 8. White
Pattern condition in EZ - Adjust)

2) Enter into White Pattern 

- Pressing POWER ON Key on Service Remote Control

(S R/C)

- Enter the Ez - Adjust by pressing ADJ Key on Service

Remote Control (S R/C).

- Select the 7. White Pattern using CH +/- Key and

press the Enter(

Y

) Key. 

Display the 100% Full White Pattern. 

[

The set will display white screen without a signal

generator in this mode.

If you turn on a still screen more than 20 minutes (Especially
Digital pattern, Cross Hatch Pattern), an afterimage may occur
in the black level part of the screen.

(1) Test Equipment: PC, Jig for download
(2) Connect the power of VSC B/D.
(3) Execute download program(iMPACK) of PC.
(4) After executing the hot key on the Programmer, click icon
(5) End after confirming

(1) Connect the MEMORY JIG and PC.
(2) Turn on the JIG MAIN POWER SWITCH.
(3) After turn on the PC and MONITOR, execute the

‘Certificate Downloader v1.4’  from the screen.

(1) After open the ‘Certificate Downloader v1.4’, enter

Connection set and set the as same below.
The port settings are determined by each PC's setup.

(2) Select ‘Connection’ and SET connected to RS-232C. 
(3) After clicking "Enter", confirm that "Enter Password:"

appears.

- 9 -

PC

VSC

B/D

<Fig 1>  Connection Diagram of EPLD Download