DOWNLOAD LG 50PM6700-TK (CHASSIS:PA22A) Service Manual ↓ Size: 18.73 MB | Pages: 74 in PDF or view online for FREE

- 9 -

(1) Press the EYE Key on the adjustment remote controller.

(2)  Check the Sensor DATA ( It must be under 10) and keep 

the data longer than 1.5s

(3) Check ‘OK’

(Sensor DATA 0 ~ 4095, Power Saving Mode 0 ~ 12)

*  IF you press IN-STAP Button, change Green Eye-check 

OSD.

* In this case Network setting is on Manual Setting.

Connect : SET->LAN Port == PC->LAN Port

(1) Play the LAN Port Test PROGRAM.

(2) Input IP set up for an inspection to Test 

* IP Number : 12.12.2.2

* In this case Network setting is on Manual Setting.

(1) Play the LAN Port Test Program.

(2) connect each other LAN Port Jack.

(3) Play Test (F9) button and confirm OK Message.

(4) remove LAN CABLE

(1) Equipment: RF R/C for test,

(2) You must confirm the battery power of RF-R/C before test

     (Recommend that change the battery per every lot) 

(3) Sequence (test)

1)  if you select the ‘start key(Wheel Key)’ on the controller, 

you can pairing with the TV SET.

2)  You can check the cursor on the TV Screen, when select 

the ‘Wheel Key’ on the controller 

3)  You must remove the pairing with the TV Set by select 

‘Mute Key’ on the controller.

Step 1) Turn on TV

Step 2)  Select ‘Network Connection’ option in Network Menu.

Step 3)  Select  ‘Start  Connection’  Button  in  ‘Network 

Connection’.

Step 4)  If the system finds any AP like blow PIC, it is working 

well.

Green Eye-Check(Factory Mode)

Sensor Data 

9

Power saving mode 

1

OK

- 10 -

- Required Equipment

● Pattern Generator : 

   MSHG-600, MSPG-6100 [SUPPORT HDMI1.4])

   MODE : HDMI mode NO. 872 

   Pattern No.83

(1)  Please input 3D test pattern like below (HDMI mode NO. 

872 , pattern No.83)

(2)  When 3D OSD appear automatically, then press OK button 

on ADJ Remote Controller.

(3) Check the picture. The picture must be same as below.

     (Don’t have to wear 3D glasses.)

(Serial No & Model name)

(1)  Push  the  menu  button  and  press  red  button  on  R/C  to 

enter ‘Customer Support’menu.

(2)  Move to ‘signal test’ menu. And check Serial No & Model 

Name Select the STATION -> Diagnostics -> To set

*  Before  put  a  *.epk  to  USB  Stick  make  ‘LG_DTV’  folder  in 

USB. Then, put *.epk file to ‘LG_DTV’ folder and Turn on TV

(1) Put the USB Stick to the USB socket 

(2) Automatically detecting update file in USB Stick

*  If your downloaded program version in USB Stick is Low, 

it didn’t work. 

   But  your  downloaded  version  is  High,  USB  data  is 

automatically detecting.

(3) Show the message “Copying files from memory”

(4) Updating is staring. 

(5) Updating Completed, The TV will restart automatically.

  After  turn  on TV,  Please  press  ‘IN-STOP’  button  on ADJ 

Remote-control.

*  IF  you  don’t  have ADJ  R/C,  enter  ‘Factory  Reset’  in 

OPTION MENU.

(6)  When TV turns on, check the Updated version on Product/

Service Info. MENU.

- 11 -

- 12 -

200

400

300

120

520

590

580

601

201

204

205

206

203

304

209

303

540

310

305

301

208

302

900

910

202

207

501

240

560

LV

1

A10

A9

A12

A13

530

A2

A22

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These 
parts are identified by       in the Schematic Diagram and EXPLODED VIEW. 
It is essential that these special safety parts should be replaced with the same components as 
recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. 
Do not modify the original design without permission of manufacturer.