LG 50PJ250-ZC / 50PJ250N-ZC (CHASSIS:PD01A) Service Manual ▷ View online
- 4 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
V
Application Range
This spec is applied to the PLASMA TV used PD01A Chassis.
V
Specification
Each part is tested as below without special appointment.
(1) Temperature : (25 ± 5) °C (77 ± 9) °F, CST : 40 ± 5
(2) Relative Humidity: (65 ± 10) %
(3) Power Voltage: Standard Input voltage (100 - 240V~, 50/60Hz)
(2) Relative Humidity: (65 ± 10) %
(3) Power Voltage: Standard Input voltage (100 - 240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 20 minutes prior to the adjustment.
V
Test Method
(1) Performance : LGE TV test method followed.
(2) Demanded other specification
(2) Demanded other specification
Safety : CE, IEC specification
EMC : CE, IEC
EMC : CE, IEC
V
Module Specification
(1) 50” HD
Display Screen Device
Aspect Ratio
PDP Module
Operating Environment
Storage Environment
Input Voltage
1
2
3
4
5
6
No
Item
Specification
Remark
50 inch Wide Color Display Module
16:9
PDP50 T1####,
RGB Closed(Well) Type, Glass Filter(38%)
Pixel Format: 1365 horiz. By 768 ver.
1) Temp. : 0 ~ 40deg
2) Humidity : 20 ~ 80%
3) Temp. : -20 ~ 60deg
4) Humidity : 10 ~ 90%
AC100-240V~, 50/60Hz
PDP
LGE SPEC.
Maker LG
- 5 -
V
Model General Specification
No
Item
Specification
Remarks
1
Market
Albania, Austria, Belgium, Bosnia, Bulgaria,
36 Country
Coratia, Czech, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Ireland,
Italy, Kazakhstan, Latvia, Lithuania,
Luxembourg, Morocco, Netherlands, Norway,
Poland, Portugal, Romania, Russia, Serbia,
Slovenia, Spain, Sweden, Slovakia,
Switzerland, Turkey, Ukraine, UK
2
Broadcasting system
1) PAL/SECAM BG
EU (PAL Market)
2) PAL/SECAM DK
3) PAL
Ⅰ/Ⅱ
4) SECAM L/L’
5) DVB T
6) DVB C
3
Receiving system
Analog : Upper Heterodyne
Digital : COFDM, QAM
4
Scart Jack (2EA)
PAL, SECAM
Scart 1 Jack is Full scart and support
RF-OUT(Analoge)
Scart 2 jack is Half scart and support
MNT-OUT.
5
Video Input (1EA)
PAL, SECAM, NTSC
Side AV except PJ20, PK20
6
Component Input (1EA)
Y/Cb/Cr, Y/ Pb/Pr
rear
7
RGB Input
RGB-PC
Analog (D-Sub 15Pin) except PJ20, PK20
8
HDMI Input (4EA)
HDMI-PC
HDMI1/DVI, HDMI2, HDMI3
HDMI-DTV
1ea : PJ20
2ea : PK30, PK20, PJ60, PJ50, PJ30
3ea : PK50, PK70
9
Audio Input (3 EA)
RGB/DVI Audio, Component, AV
L/R Input
10
SPDIF Out(1 EA)
SPDIF Out
11
USB
For SVC, S/W Download, X-Studio, DivX
PJ30 doesn’t support Divx
PK20, PJ20 only for SVC
12
Bluetooth
Bluetooth Phone(JPEG, MP3),
Only 50/60PK550
Bluetooth Headset(mono, stereo)
Profile : A2DP, BIP, FTP, GAVDP, HSP, OPP
- 6 -
V
Chroma & Brightness (Optical)
(1) (With 38% Glass Filter) 50T1 module
No
Item
Min
Typ
Max
Unit
Remark
1.
White peak brightness
369
410
-
cd/m
2
(*) Peak Brightness Mode
-1/100 white Window pattern
(Typically 1% Window size)
-100IRE (255Gray)
-Picture: Vivid (Medium)
-Input: HDMI-PC(1920*1080 60Hz)
*Peak Brightness Condition may Slightly
different between sets.
158
173
-25/100 white Window pattern
2.
White average brightness
44
50
cd/m
2
- 100% Window White Pattern
- 100IRE(255Gray)
- Picture: Vivid(Medium )
3.
Brightness uniformity
-10
0
+10
%
- 85IRE(216Gray) 100% Window White Pattern
- Picture: Vivid(Medium)
4.
Color
White
X
0.270
0.285
0.300
- White : 85IRE(216Gray) 100% Window
Coordinate
Y
0.278
0.293
0.303
White Pattern
RedX
0.635
0.640
-
- R/G/B : 100IRE(255Gray) 100% Wind
ow
Y
0.318
0.333
0.345
White Pattern
Green
X
0.242
0.300
0.305
- Picture: Vivid(Medium )
Y
0.595
0.600
-
- 100% Window
Blue
X
-
0.150
0.158
Y
-
0.065
0.075
5.
Color coordinate uniformity
-0.01
Average
+0.01
- 85IRE 100% Window White Pattern
- Picture: Vivid(Medium)
6.
Contrast ratio at dark room
100k: 1
1,000k: 1
-1/100 white window pattern(Peak mode)
-100IRE(255Gray)
-Picture: Vivid(Medium)
-Input: HDMI-PC (1920*1080 60Hz)
7.
Color
Cool
X
0.261
0.276
0.291
- 85IRE 100% Window White Pattern
Temperature
Y
0.268
0.283
0.298
Warm : ColorGamut => WIDE
Medium
X
0.270
0.285
0.300
Cool : Color temperature C30
Y
0.278
0.293
0.308
Meduum : Color temperature 0
Warm
X
0.298
0.313
0.328
Warm : Color temperature W30
Y
0.314
0.329
0.344
- 7 -
ADJUSTMENT INSTRUCTION
1. Application
This spec. sheet is applied to all of the PD01A chassis.
2. Specification
[Caution: The module keeping condition]
- The module keeping condition: The normal temperature
condition(more than 15°C)
--> Immediately the line supply.
-. The module keeping condition: 0°C
--> The module must be kept for more than 2 hours at the
normal temperature.
-. The module keeping condition: -20°C
--> The module must be kept for more than 3 hours at the
normal temperature.
-. The case of Gu-mi factory at the winter season.
--> The module must be kept for more than 5 minutes at
the heating zone(40°C~45°C).
(1) The adjustment is according to the order which is
designated and which must be followed, according to the
plan which can be changed only on agreeing.
plan which can be changed only on agreeing.
(2) If there is no specific designation, the adjustment must be
performed in the circumstance of 25±5°C of temperature
and 65±10% of relative humidity.
and 65±10% of relative humidity.
(3) The input voltage of the set must keep 100~240V,
50/60Hz.
(4) Input signal Unit: Product Specification Standard.
(5) The set must be operated for about 5 minutes prior to the
(5) The set must be operated for about 5 minutes prior to the
adjustment.
O
After turning on RGB Full Window pattern in HEAT-RUN
Mode, the receiver must be operated.
Mode, the receiver must be operated.
O
Enter into HEAT-RUN MODE
1) Press the ‘POWER ON’ button on R/C for adjustment.
2) Press the ‘ADJ’ button on R/C and enter EZ ADJUST
2) Press the ‘ADJ’ button on R/C and enter EZ ADJUST
Select “7. Test Pattern” by using
D
/
E
(CH +/-) and press
ENTER(
V
)
Select “White” by using
F
/
G
(VOL +/-) and press
ENTER(
V
)
- Set heat run should be activated without a signal generator.
- Single color patterns (RED / BLUE / GREEN) of HEAT RUN
- Single color patterns (RED / BLUE / GREEN) of HEAT RUN
MODE are used to check a plasma panel.
- Caution: If you turn on a still screen more than 20 minutes
(Especially digital pattern, cross hatch pattern), an after
image may be made in the black level part of the screen.
image may be made in the black level part of the screen.
[Caution]
- Use ‘power on’ button of a service R/C to power on TV set.
- Do not connect any external input cable if there is no any
- Use ‘power on’ button of a service R/C to power on TV set.
- Do not connect any external input cable if there is no any
specifics.
3. Update S/W using Auto Download
through the USB
Caution: S/W version of USB file (xxx.epk) must be bigger than
one which is downloaded previously.
(1) Insert the USB stick to the USB socket
(2) A downloaded file in USB stick will be detected
(2) A downloaded file in USB stick will be detected
automatically.
(3) If S/W version of USB file (xxx.epk) is bigger than one
which is downloaded previously, the message, “Copying
files from memory”, will appear.
files from memory”, will appear.
(4) If an update procedure was completed, TV set will be
turned off and on automatically.
(5) If TV set is turned on, check an updated version.
* If a downloaded version is more bigger than one of which
TV set had, TV set can lost channel data. In this case,
you have to scan channels again.
you have to scan channels again.
4. After Downloading S/W, Adjust
TOOL OPTION
(1) Push “IN-START” button on a service R/C.
(2) Select “Tool Option 1” and Push “OK” button.
(3) Put the number of a below table in order of a suffix of the
(2) Select “Tool Option 1” and Push “OK” button.
(3) Put the number of a below table in order of a suffix of the
“Tool Option(X)”.
(Each model has a different number.)
(Each model has a different number.)
Model Tool Option1 Tool Option2 Tool Option3 Tool Option4
42PJ250-ZC
25088
546
2252
3360
42PJ350-ZA
25024
1574
35020
3360
42PJ550-ZD
24960
1574
51404
3360
42PJ650-ZA
24896
1574
51408
3360
50PJ250-ZC
37376
546
2252
3360
50PJ350-ZA
37312
1574
35020
3360
50PJ550-ZD
37248
1574
51404
3360
50PJ650-ZA
37184
1574
51408
3360
50PK250-ZA
37120
1570
2252
3360
50PK350-ZB
37056
1574
51404
3360
50PK550-ZE
36992
2598
55500
11552
50PK750-ZA
36928
2598
51408
11552
60PK250-ZA
49408
1570
2252
3360
60PK550-ZE
49280
2598
55500
11552
Click on the first or last page to see other 50PJ250-ZC / 50PJ250N-ZC (CHASSIS:PD01A) service manuals if exist.