DOWNLOAD LG 50PC1R-ZH (CHASSIS:PP62A) Service Manual ↓ Size: 14.2 MB | Pages: 46 in PDF or view online for FREE

- 9 -

NOTE : Specifications and others are subject to change without notice for improvement.

V

This spec is applied to the 50” PLASMA TV used PP62A Chassis.

V 

Each part is tested as below without special appointment.
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)

* Standard Voltage of each product is marked by models.

4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.

V

1) Performance : LGE TV test method followed.
2) Demanded other specification 

Safety : CE, IEC specification
EMC

: CE, IEC

V

Chassis

PP62A

50PC1R-ZH

EU

LG

Model Name

Market

Brand

Remark

50PC1R-ZH

Safety : IEC/EN60065, EMI : EN55013, EMS : EN55020

EU

Model

Appliance

Market

Display Screen Device

Aspect Ratio

PDP Module

Operating Environment

Storage Environment

Input Voltage

1

2

3

4

5

6

No

Item

Specification

Remark

50” Wide Color Display Module

16:9

PDP50X4, 

RGB Closed Type

1)Temp.

: 0~40deg

2)Humidity : 0~85%

3)Temp.

: -20~60deg

4)Humidity : 0~85%

100-240V~, 50/60Hz

Plasma Display Panel

Glass Filter

LGE SPEC.

Maker : Sanken

- 10 -

White peak Brightness

White average brightness

Brightness uniformity

Color Coordinate

White

X

Y

Red

X

Y

Green

X

Y

Blue

X

Y

Color coordinate uniformity

Contrast ratio at dark room

Color Temperature

Normal

Warm

Cool

Color pull in Range

PAL

NTSC

Color killer Sensitivity

450

280

60

-10

0.270

0.275

0.645

0.310

0.230

0.650

0.125

0.035

-0.01

4000:1

8300

6200

10000

-500

-50

-80

500

300

70

0

0.290

0.295

0.665

0.330

0.250

0.670

0.145

0.055

Average

8000 :1

9300

7200

11000

-

-

+10

0.310 

0.315

0.685

0.350

0.270

0.690

0.165

0.075

+0.01

10300

8200

12000

+500

+500

1

2

3

4

5

6

7

8

9

No

Item

Remark

(*) Special Peak Brightness Mode

-1/100 ~ 3/100 white window Pattern

(typically 1% window size)

- APC : User (Decrease brightness from

dynamic mode until entering the peak

brightness mode, brightness : below

50 on OSD Menu)

- HDMI DTV(720P) input

- Special Peak Brightness Condition may

slightly different between Sets / module

(*) Normal Mode

- HDMI input

- 1/100 white window pattern

- APC : Clear (Dynamic)

- Full White Pattern

- APC : Clear (Dynamic)

- 85IRE Full White Pattern

- APC : Clear (Dynamic)

- 85IRE Full White Pattern

- APC : Clear (Dynamic)

- 85IRE Full White Pattern

- APC : Clear (Dynamic)

-1/100 White Window Pattern

-HDMI input

- Special mode

- 85IRE Full White Pattern

- APC : Clear (Dynamic)

cd/m2

cd/m2

cd/m2

%

Hz

Hz

dBm

Min              Typ              Max              Unit

- 11 -

Market

Broadcasting system

Available Channel

Receiving system

Scart Jack (2EA)

Video Input (2EA)

S-Video Input (2EA)

Component Input (1EA)

RGB Input(1EA)

HDMI Input(2EA)

Audio Input (4EA)

Wired Control(1EA)

Audio variable out(1EA)

1

2

3

4

5

6

7

8

9

10

11

12

13

No

Item

Specification

Remark

EU

PAL-BG/I/DK, SECAM

BAND

PAL

SECAM

VHF

E2~E12

UHF

E21~E69

CATV

S1~S20

HYPER

S21~S41

Upper Heterodyne

PAL, SECAM, NTSC,NTSC4.43

PAL, SECAM, NTSC,NTSC4.43

PAL, SECAM, NTSC,NTSC4.43

Y/Cb/Cr, Y/Pb/Pr

RGB-PC,

RGB-DTV

HDMI-PC

HDMI-DTV

PC Audio, Component(1EA), AV (2EA)

4 System : PAL, SECAM, NTSC, PAL60

4 System : PAL, SECAM, NTSC, PAL60

4 System : PAL, SECAM, NTSC, PAL60

L/R Input

- 12 -

These instructions are applied to all of the 50” PLASMA TV,
PP62A Chassis.

(1) Because this is not a hot chassis, it is not necessary to use

an isolation transformer. However, the use of isolation
transformer will help protect test instrument.

(2) Adjustment must be done in the correct order.
(3) The adjustment must be performed in the circumstance of

25±5°C of temperature and 65±10% of relative humidity if
there is no specific designation.

(4) The input voltage of the receiver must keep 100-220V,

50/60Hz.

(5) The receiver must be operated for about 15 minutes prior

to the adjustment.

O

After RGB Full white HEAT-RUN Mode, the receiver must

be operated prior to adjustment.

O

Enter into HEAT-RUN MODE

1) Press the POWER ON KEY on R/C for adjustment.
2) OSD display and screen display PATTERN MODE.

[ Set is activated HEAT-RUN without signal generator in

this mode.

[ Single color pattern(RED/BLUE/GREEN) of HEAT-RUN 

mode uses to check PANEL.

1) Install the LGIDS. (idsinst.exe)
2) After installation, restart your PC.
3) Extract [files.zip] to folder [c:\LGIDS\files].
4) Start LGIDS.

1) Select “PDP” and “Hurricane” on Model dialog. And check

your connection in Communication dialog. (If your
connection is ‘NG’, then set your PORT.(COM1,2,3,...)
correctly.)

2) Connect RS-232C cable and turn on the power.

(If your connection has completed, you can see “Ready”.)

[ If your set is not an end products but only a board, you

have to make your board to Stand-by state (LED_R). And
you have to Download in Stand_by power state.

3) Select proper CH_memory file(*.nvm) for each model at

[NVRAM Download] 

$ [Write Batch]

Next, select proper binary file(*.bin) including the CH
information for each model at [NVRAM File].

File name 

ZH Model : H3_CH_Memory_ZH.nvm

4) Click the [Download] button.

It means the completion of the CH memory download if all
items show ‘OK’ and Status is changed by ‘PASS’ at the
lower right corner of the window.

5) If you want to check whether the CH information is

memorized correctly or not, click the [Verify] button. 
And then compare NVRAM File(*.bin) with the CH
information downloaded.

(Fig. 1)

(Fig. 2)

(1)

(2)

(4)

(3)

(Fig. 3)