LG 47LV3500-ZA / 47LV3550-ZB / 47LV355A-ZB / 47LV355C-ZB / 47LV355N-ZB / 47LV355U-ZB (CHASSIS:LD01U) Service Manual ▷ View online
- 6 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
4. Model General Specification
1. Application range
This specification is applied to the LCD/ LED LCD TV used
LD01U chassis.
LD01U chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature
: 25 ºC ± 5 ºC (77 ºF ± 9 ºF), CST : 40 ºC ± 5 ºC
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage
3) Power Voltage
: Standard input voltage (AC 100-240 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
2) Demanded other specification
- Safety: CE, IEC specification
- EMC:CE, IEC
- EMC:CE, IEC
No.
Item
Specification
Remarks
1 Market
EU(PAL
Market-36Countries)
DTV-T/C & Analog
(Germany, Netherlands, Switzerland, Hungary, Austria, Slovenia, Sweden, Denmark,
Finland, Norway, Bulgaria
DTV-T & Analog
UK, France, Spain, Italy, Belgium, Russia, Luxemburg, Greece, Czech, Croatia,Turkey,
Morocco, Ireland, Latvia, Estonia, Lithuania, Poland, Portugal, Romania, Ukraine
Analog Only
Kazakhstan, Albania, Bosnia, Serbia, Slovakia
2 Broadcasting system
1) PAL-BG
2) PAL-DK
3) PAL-I/I’
4) SECAM L/L’
5) DVB-T/C/S (ID TV)
3 Receiving system
Analog : Upper Heterodyne
Digital : COFDM, QAM
4 Scart Jack (1EA)
PAL, SECAM
Scart Jack is Full scart and support RF-OUT(analog & DTV)
5
Video Input RCA(1EA) PAL, SECAM, NTSC
4System : PAL, SECAM, NTSC, PAL60
6
Component Input(1EA) Y/Cb/Cr, Y/Pb/Pr
7
RGB Input
RGB-PC
Analog(D-SUB 15PIN)
8
HDMI Input (3EA)
HDMI1-DTV (DVI)
PC(HDMI version 1.3)
HDMI2-DTV
Support HDCP
HDMI3-DTV
9
Audio Input (3EA)
RGB/DVI Audio, Component, AV
L/R Input
10 SDPIF out (1EA)
SPDIF out
11 Earphone out (1EA)
Antenna, AV1, AV2, AV3, Component,
RGB, HDMI1, HDMI2, HDMI3, HDMI4
12 USB (1EA)
For SVC (download)
DivX
13 DVB
DVB-T
CI : UK, Finland, Denmark, Norway, Sweden, Russia, Spain, Ireland, Luxemburg, Belgium, Netherland
CI+ : France(Canal+), Italy(DGTVi)
DVB-C
CI : Switzerland, Austria, Slovenia, Hungary, Bulgaria
CI+ : Switzerland(UPC,Cablecom), Netherland(Ziggo), Germany(KDG,CWB), Finland(labwise)
DVB-S
CI+ : Germany(Astra HD+)
- 7 -
6. Component Video Input (Y, C
B
/P
B
, C
R
/P
R
)
No.
Specification
Remark
Resolution
H-freq(kHz)
V-freq(Hz)
1.
720x480 15.73
60.00
SDTV,DVD
480i
2.
720x480 15.63
59.94
SDTV,DVD
480i
3.
720x480
31.47
59.94 480p
4.
720x480
31.50
60.00 480p
5.
720x576
15.625
50.00
SDTV,DVD 625 Line
6.
720x576 31.25
50.00
HDTV
576p
7.
1280x720
45.00
50.00 HDTV
720p
8.
1280x720
44.96
59.94 HDTV
720p
9.
1280x720 45.00
60.00
HDTV
720p
10.
1920x1080 31.25
50.00
HDTV
1080i
11.
1920x1080
33.75
60.00 HDTV
1080i
12.
1920x1080 33.72
59.94
HDTV
1080i
13.
1920x1080 56.250
50 HDTV
1080p
14.
1920x1080
67.5 60
HDTV
1080p
No.
Specification
Proposed
Remark
Resolution
H-freq(kHz)
V-freq(Hz)
Pixel Clock(MHz)
1.
720*400
31.468
70.08
28.321
For only DOS mode
2.
640*480
31.469
59.94
25.17
VESA
Input 848*480 60 Hz, 852*480 60 Hz
-> 640*480 60 Hz Display
3.
800*600
37.879
60.31
40.00 VESA
4.
1024*768 48.363 60.00
65.00 VESA(XGA)
5.
1280*768 47.78 59.87
79.5
WXGA
6.
1360*768 47.72
59.8
84.75 WXGA
FHD
Model
7.
1366*768
47.56
59.6
84.75
WXGA
WXGA Model
8.
1200*1024
63.901
60.02
100.075
SXGA
FHD model
9.
1280*720
45
60
74.25
720p
DTV Standard
10.
1920*1080 67.5
60
148.5 WUXGA
FHD
model
7. RGB (PC)
- 8 -
8. HDMI Input
(1) DTV Mode
No.
Resolution
H-freq(kHz)
V-freq.(Hz)
Pixel clock(MHz)
Proposed
Remark
1.
720*400 31.468
70.08
28.321
HDCP
2.
640*480 31.469
59.94
25.17
VESA HDCP
3. 800*600
37.879
60.31
40.00
VESA
HDCP
4.
1024*768
48.363
60.00 65.00
VESA(XGA)
HDCP
5.
1280*768 47.78
59.87
79.5
WXGA HDCP
6.
1360*768 47.72 59.8 84.75
WXGA HDCP
7.
1280*720
45
60
74.25
HDCP
8.
1280*1024 63.981
60.02 108.875 SXGA
HDCP/FHD
model
9.
1920*1080 67.5
60
148.5
WUXGA
HDCP/FHD
model
(2) PC Mode
No.
Resolution
H-freq(kHz)
V-freq.(Hz)
Pixel clock(MHz)
Proposed
Remark
1.
720*480 31.469/31.5
59.94/60
27.00/27.03
SDTV
480P
2.
720*576 31.25
50
54
SDTV
576P
3.
1280*720 37.500
50
74.25
HDTV
720P
4.
1280*720 44.96/45
59.94/60
74.17/74.25
HDTV
720P
5.
1920*1080 33.72/33.75
59.94/60
74.17/74.25
HDTV
1080I
6.
1920*1080 28.125
50.00
74.25
HDTV
1080I
7.
1920*1080 26.97/27
23.97/24
74.17/74.25
HDTV
1080P
8.
1920*1080
33.716/33.75
29.976 /30.00
74.25
HDTV 1080P
9.
1920*1080 56.250
50
148.5
HDTV
1080P
10.
1920*1080 67.43/67.5
59.94/60
148.35/148.50
HDTV
1080P
- 9 -
ADJUSTMENT INSTRUCTION
1. Application Range
This specification sheet is applied to all of the LCD/ LED LCD
TV with LD01U chassis.
TV with LD01U chassis.
2. Designation
1) The adjustment is according to the order which is
designated and which must be followed, according to the
plan which can be changed only on agreeing.
plan which can be changed only on agreeing.
2) Power Adjustment: Free Voltage
3) Magnetic Field Condition: Nil.
4) Input signal Unit: Product Specification Standard
5) Reserve after operation: Above 5 Minutes (Heat Run)
3) Magnetic Field Condition: Nil.
4) Input signal Unit: Product Specification Standard
5) Reserve after operation: Above 5 Minutes (Heat Run)
Temperature : at 25 ºC ± 5 ºC
Relative humidity : 65 % ± 10 %
Input voltage : 220 V, 60 Hz
Relative humidity : 65 % ± 10 %
Input voltage : 220 V, 60 Hz
6) Adjustment equipments: Color Analyzer(CA-210 or CA-110),
DDC Adjustment Jig equipment, Service remote control.
7) Push The “IN STOP” key - For memory initialization.
3. Main PCB check process
* APC - After Manual-Insult, executing APC
* Boot file Download
1) Execute ISP program “Mstar ISP Utility” and then click
“Config” tab.
2) Set as below, and then click “Auto Detect” and check “OK”
message
If “Error” is displayed, Check connection between
computer, jig, and set.
computer, jig, and set.
3) Click “Read” tab, and then load download file (XXXX.bin)
by clicking “Read”
4) Click “Connect” tab. If “Can’t” is displayed, check
connection between computer, jig, and set.
5) Click “Auto” tab and set as below
6) Click “Run”.
7) After downloading, check “OK” message.
6) Click “Run”.
7) After downloading, check “OK” message.
* USB DOWNLOAD
1) Put the USB Stick to the USB socket
2) Automatically detecting update file in USB Stick
2) Automatically detecting update file in USB Stick
- If your downloaded program version in USB Stick is Low,
it didn’t work. But your downloaded version is High, USB
data is automatically detecting
data is automatically detecting
3) Show the message “Copying files from memory”
filexxx.bin
(4)
(7)
.OK
(5)
(6)
(1)
fi lexxx.bin
(2)
(3)
Please Check the Speed :
To use speed between
To use speed between
from 200KHz to 400KHz
Case1 : Software version up
1. After downloading S/W by USB, TV set will reboot
automatically
2. Push “In-stop” key
3. Push “Power on” key
4. Function inspection
5. After function inspection, Push “In-stop” key.
3. Push “Power on” key
4. Function inspection
5. After function inspection, Push “In-stop” key.
Case2 : Function check at the assembly line
1. When TV set is entering on the assembly line, Push
“In-stop” key at first.
2. Push “Power on” key for turning it on.
-> If you push “Power on” key, TV set will recover
channel information by itself.
3. After function inspection, Push “In-stop” key.
Click on the first or last page to see other 47LV3500-ZA / 47LV3550-ZB / 47LV355A-ZB / 47LV355C-ZB / 47LV355N-ZB / 47LV355U-ZB (CHASSIS:LD01U) service manuals if exist.